3M Building Materialsfor Design & Construction

Building protection solutions for architects and specifiers

3M offers architects and specifiers trusted building protection solutions backed by technical expertise. Peace of mind, by design.

Silver 3M foil wrap installed around a curved commercial ventilation duct, supported by a metal bracket.

Passive fire protection solutions

Stop the spread. Protect what matters. 3M fire barrier solutions help contain the spread of fire, smoke, and gases - keeping buildings and occupants safer while supporting code compliance.

A construction worker in a hard hat and safety glasses applies 3M VentureClad insulation jacketing to HVAC equipment on a rooftop.

Air and vapor barrier solutions

Keep moisture out. Keep energy in. 3M air and vapor barrier solutions help control air leakage and moisture infiltration - two of the most common causes of building envelope failure and energy loss.

Two construction workers in orange safety gear install 3M weather barrier wrap on the exterior walls of a concrete block building under construction.

HVAC, pipe jacketing and cladding

Protect insulation. Extend system life. 3M VentureClad™ jacketing and cladding solutions provide a durable outer layer that protects pipe and duct insulation from mechanical damage, weather, and UV exposure.

Addressing your biggest design and building challenges

3M building protection solutions help architects and specifiers address common challenges related to fire protection, moisture control, air leakage, and insulation protection

Technical diagram of through-penetration firestop system C-AJ-2227, showing a pipe passing through a concrete floor with a firestop device.

Meet fire protection requirements with confidence

The challenge: Penetrations for pipes, cables, ducts, and dryer vents can compromise fire-rated assemblies if not properly sealed - creating code compliance and safety risks.

3M solutions: Help maintain the integrity of fire-rated assemblies across the most common and complex penetration types.

Construction worker in a safety harness and hard hat on an elevated lift next to a wall covered in black 3M building wrap.

Control moisture and prevent air leakage

The challenge: Air leakage and moisture infiltration cause energy loss, structural damage, and poor indoor air quality - and are difficult to fix after construction is complete.

3M solutions: Seal critical transition points and create a continuous, reliable building envelope barrier.

Blue-tinted architectural blueprints spread across a workspace with rolled technical drawings and a metal drafting compass in the foreground.

Protect insulation in high-performance environments

The challenge: Mechanical insulation is vulnerable to damage, weather, and UV exposure - leading to energy loss, higher maintenance costs, and reduced system performance.

3M solutions: Provide a tough, durable outer layer that protects insulation and extends mechanical system life.

Low-angle view of an industrial worker in a hard hat installing foil-faced insulation cladding on large outdoor HVAC piping against a clear blue sky.

Design for long-term durability and building performance

The challenge: Selecting solutions that meet today's requirements and continue to perform over the life of the building requires trusted products and reliable technical support.
The 3M advantage: A complete, well-documented portfolio backed by technical expertise and specification-ready resources.
Tested and listed assemblies to support code compliance
Specification-ready resources to simplify design and documentation
Technical support for project-specific product evaluation
A trusted portfolio spanning fire, air and vapor, and mechanical insulation protection

See our product solutions

Check out the latest new and featured specified product solutions for building protection.

3M™ Fire Barrier Dryer Ventilation Wrap

3M™ Fire Barrier Duct Wrap 615+

3M™ Fire Barrier Plenum Wrap 5A+

A roll of silver Interam Endothermic Mat showing its white backing material as it unrolls.

3M™ Interam™ Endothermic Mat E-5A-4

3M™ Fire Barrier Sealant CP 25WB+

A partially unrolled sheet of textured, dark gray 3M non-woven air barrier membrane with light gray details.

3M™ Air Barrier with Non-Woven Permeable Backing 3015VP-NW

3M™ Air and Vapor Through Wall Flashing Tape 3015TWF

A thick roll of 3M Ultra Conformable Flashing Tape 3015UC showing its dark adhesive side and white core.

3M™ Ultra Conformable Tape 3015UC

A roll of 3M Air Barrier 3015VP unrolled to show its white surface with red logos and red edges.

3M™ Air Barrier with Permeable Backing 3015VP

3M™ Air and Vapor Barrier 3015NP

Complete your building protection system

The right building protection strategy goes beyond a single product. Explore these additional resources and solutions to support your next project from concept to completion.

MasterSpec Technical Showroom

Specify with confidence. Access 3M Building Protection product solutions pre-specified for air and vapor barrier, fire protection, and insulation moisture barriers - ready to integrate into your project documentation.

Specification-ready content for key building protection systems
Covers air and vapor barrier, fire protection, and insulation moisture barrier applications
Saves time and reduces errors in the specification process

Go to the MasterSpec showroom

Continuing education for architects and specifiers

Earn CE credits and expand your expertise. 3M is proud to support professional development in the architecture and design community.

Approved CE provider for AIA continuing education credits. Find an upcoming webinar
Courses available independently and through AEC
Topics cover building protection, product application, and performance best practices. Access on-demand courses through 3M Academy
Flexible learning options to fit your schedule

Explore 3M Architectural Finishes

Looking beyond building protection? 3M™ Architectural Finishes is a dedicated design resource featuring film, architectural finishes, and glass finishes that can help bring your design vision to life.

Architectural films and surface finishes for interior and exterior applications

Glass finishes that add privacy, solar control, and aesthetic appeal

A complete resource for designers looking to enhance form as well as function

Visit the 3M Architectural Finishes site to explore the full collection

View more products for architectural design

3M offers a broad portfolio of solutions for architects and specifiers beyond building protection.

Explore additional products and categories to support your next project.

View all 3M Architectural Design product solutions

Get specification documents for your unique conditions

You want the confidence that the firestopping methods you employ will be effective and reliable. Over several decades, 3M has worked with various testing agencies such as UL and Intertek to develop system details that cover a wide array of needs. Download our documentation to learn more.

What are the key building protection solutions for architectural design? FAQ

How do I choose the right 3M Building Protection solutions for my project?

Start by identifying your project’s key performance needs, such as fire protection, moisture management, air leakage control, or insulation protection. Depending on the application, you may need one solution area or a combination of Passive Fire Protection, Air and Vapor Barrier Solutions, and HVAC or pipe jacketing and cladding solutions. Technical resources can then help confirm the best fit for your assembly and conditions. For more complex applications, a 3M technical expert can help guide solution selection.

How do air and vapor barrier requirements vary by climate and wall design?

Air barriers are important in all climates because they help reduce uncontrolled air leakage and limit moisture movement through the building envelope. Vapor control needs vary by climate, while wall design and substrate affect drainage, drying, adhesion, and durability. Evaluating these factors together can help support proper system selection and long-term performance.

What performance attributes matter most for jacketing and cladding in harsh environments?

Important attributes include weather resistance, moisture protection, impact and abuse resistance, temperature resistance, fire performance, chemical resistance, and dimensional stability. Ease of application, long-term durability, and ease of maintenance or repair may also be important depending on the environment and system demands.

What should specifiers look for regarding system compatibility and limitations?

Architects and specifiers should review certifications, test reports, technical data sheets, and technical bulletins to understand how a system has been evaluated and where it is intended to be used. It is also important to confirm compatibility, installation requirements, and any limitations related to exposure, movement, or application method. For additional product and application guidance, they can also contact a 3M local sales representative.

What key factors determine the right passive fire protection for an assembly?

When selecting a passive fire protection solution, it is important to evaluate the type of assembly, the penetrant or joint condition, and the required fire-resistance ratings. Additional considerations may include movement, smoke sealing needs, access limitations, and other project-specific conditions. Reviewing tested and listed systems can help confirm that the selected solution aligns with the intended application and code requirements. This approach can support both compliance and constructability.

48 products

Your selections:

Digtial images of Specified Products Fire Protection products. Application shot of Fire Barrier FS195+ Wrap. ~Keywords: barrier, construction, fire, product, protection.

3M™ Fire Barrier Wrap Strips FS-195+, 2 in x 24 in, 10 Each/Case

3M Stock

7000006371

Previous 3M Stock

98040022224

UPC

00051115071157

Alternative ID

FS-195+

Product Image: 3M(TM) Fire Block Foam FB-Foam, Orange, 12 fl oz., Aerosol Can, 12/case, SKU 98-0400-5614-9

3M™ Fire Block Foam, Orange, 12 fl oz, 12 Can/Case

3M Stock

7100006734

Previous 3M Stock

98040056149

UPC

00051115549076

Alternative ID

FB-FOAM-ORANGE

3M™ Interam™ Endothermic Mat E-5A-4, 24.5 in x 20 ft, 1 Roll/Case

3M Stock

7000031969

Previous 3M Stock

98040056206

UPC

00051115549137

Alternative ID

E-5A-4

3M(TM) Fire Barrier Sealant FD 150pls family red and blue on white backgound used in PoW Catalogs

3M™ Fire Barrier Sealant FD 150+

Options available

3M™ Fire and Water Barrier Tape

Options available

Group Product Shot: 3M(TM) Fire Barrier Composite Sheet CS-195+, group photo used in Spec Guide

3M™ Fire Barrier Composite Sheet CS-195+

Options available

3M(TM) Fire Barrier Ultra Plastic Pipe Device - Group. Updated: 10/01/13.

3M™ Fire Barrier Plastic Pipe Device

Options available

3M(TM) Fire Barrier Sealant CP 25WBplus family on white backgound used in PoW Catalogs

3M™ Fire Barrier Sealant CP 25WB+

Options available

3M(TM) Fire Barrier CID Metal Deck Adapters on white backgound used in PoW Catalogs

3M™ Fire Barrier Cast-In Device Metal Deck Adaptors

Options available

Product Shot: 3M(TM) Fire Barrier Cast-In Device Height Adaptor Group. Last update: 01/09. Contact: Ann Panian 651-737-2615

3M™ Fire Barrier Cast-In Device Height Adaptors

Options available

3M(TM) Fire Barrier Cast-In Device 2 in Metallic on white backgound used in PoW Catalogs

3M™ Fire Barrier Cast-In Devices for Plastic Pipes

Options available

3M(TM) Fire Barrier Cast-In Device 2 in Non-metallic on white backgound used in PoW Catalogs

3M™ Fire Barrier Cast-In Devices for Metal Pipes

Options available

3M(TM) Fire Barrier Self-Locking Pillows Group Image

3M™ Fire Barrier Self-Locking Pillows

Options available

Product Shot: 3M(TM) Fire Barrier Putty Sleeve Kit DT 400, 4 inch Last DMR Update: 11-19-09

3M™ Fire Barrier Putty Sleeve Kits

Options available

3M™ Fire Barrier Duct Wrap 615+

Options available

3M(TM) Fire Barrier Moldable Putty MP+ Sticks and Pads - Group

3M™ Fire Barrier Moldable Putty Pads MPP+

Options available

3M(TM) Fire Barrier Sealant IC 15WBplus family on white backgound used in PoW Catalogs Updated March 2011

3M™ Fire Barrier Sealant IC 15WB+

Options available

3M(TM) Fire Barrier WT Sealant 1003 SL family on white backgound used in PoW Catalogs

3M™ Fire Barrier Water Tight Sealant 1003 SL

Options available

3M(TM) Fire Barrier WT Sealant 1000 NS family on white backgound used in PoW Catalogs

3M™ Fire Barrier Water Tight Sealant 1000 NS

Options available

3M(TM) Fire Barrier Water Tight Sealant 3000 WT family product image. Updated 12/1/2010

3M™ Fire Barrier Water Tight Sealant 3000 WT

Options available

3M™ Fire Barrier Dryer Ventilation Wrap

Options available

3M™ Fire Barrier Tuck-In Wrap Strip Group Shot

3M™ Fire Barrier Tuck-In Wrap Strips

Options available

Formatted for PoW Catalog on end user website.

3M™ Fire Barrier Pass-Through Brackets Square

Options available

3M™ Fire Barrier Plenum Wrap 5A+

Options available

3M(TM) Fire Barrier Moldable Putty Stix on white backgound used in PoW Catalogs

3M™ Fire Barrier Moldable Putty Stix MP+

Options available

3M™ Fire Barrier Rated Foam FIP 1-Step

Options available

Group Product Shot: 3M(TM) FireDam(TM) Spray 200, Red and Gray, 5 gallon pail, JPG format

3M™ FireDam™ Spray 200

Options available

3M(TM) Fire Barrier Silicon Sealant 2000+. 2/6/2/13

3M™ Fire Barrier Silicone Sealant 2000+

Options available

3M™ Fire Barrier Mortar

Options available

3M™ Fire Barrier Electrical Box Inserts

Options available

Product Shot: 3M(TM) Fire Barrier Pass-Through Device_2 in round on white bkgnd Contact: Jenny Hicks, 651-737-2959 Last Update 4/10/07

3M™ Fire Barrier Pass-Through Devices Round

Options available

3M™ Fire Barrier Water Tight Spray

Options available

3M™ Fire Barrier Pass-Through Brackets Round

Options available

Product Shot: 3M(TM) Interam(TM) Ultra GS, ~Keywords: barrier, construction, fire, product, protection.

3M™ Fire Barrier Ultra GS Wrap Strip

3M Stock

B40070035

3M(TM) Fire Barrier Pillows family on white backgound used in PoW Catalogs

3M™ Fire Barrier Pillows

3M Stock

B40070037

Alternative ID

FB249

Product Shot: 3M(TM) Expantrol(TM) Flexible Intumescent Strip E-FIS, Black, Adhesive-Backed, 1/16 in x 1/2 in x 50 ft, Roll, 10/case

3M™ Expantrol Flexible Intumescent Strip E-FIS, Adhesive-Backed, Black, 1/16 in x 1/2 in x 50 ft, 10 Rolls/Case

3M Stock

B40070033

UPC

00051115116261

3M(TM) Fire Barrier Pass-Through Device - 2.5" Square Stud Open lid

3M™ Fire Barrier Pass-Through Device PT4SD, 4 in Square, 6/Case

3M Stock

B40065437

UPC

00051115165979

Alternative ID

PT4SD

Digtial images of Specified Products Fire Protection products. Product shot of Ultra Plastic Pipe Device. ~Keywords: barrier, construction, fire, product, protection.

3M™ Ultra Fast Anchors UFA-16, 3/4 in x 16 in, (40 Each/Bag) 400 Each/Case

3M Stock

B40065438

UPC

00051115115301

Alternative ID

ULTRA-16

3M™ Interam™ Endothermic Mat ES-5A-12 product photo

3M™ Interam™ Endothermic Mat ES-5A-12, .62 M x 6.1 M, 1 Roll/Case

3M Stock

B5000000304

UPC

00051115549267

Alternative ID

ES-5A-12

3M(TM) Fire Barrier CID Tub Box Assemply on white backgound used in PoW Catalogs

3M™ Fire Barrier Cast-In Tub Box Assembly 3TB, 3 in, 6/Case

3M Stock

B40065439

UPC

00051115165863

3M(TM) Nomad(TM) Heavy Traffic Unbacked Scraper Matting 8100

3M™ Nomad™ Heavy Traffic Entrance Matting 8150

3M Stock

B00013664

3M(TM) Nomad(TM) Medium Traffic Scraper Matting 6050

3M™ Nomad™ Medium Traffic Entrance Matting 6050

3M Stock

B00013665

3M™ Fire Barrier Duct Wrap 615+

3M Stock

123

Alternative ID

615+

3M™ Fire Barrier Restricting Collar RC-1, 2 in, 1/case

3M Stock

7100009600

Previous 3M Stock

80008006563

UPC

00054007083245

Alternative ID

RC-1

3M™ Fire Barrier Plug Four Inch, Howard Berg, 02-2016

3M™ Fire Barrier Plug PLG4, 4 in, Maroon, 4/Case

3M Stock

7010401345

UPC

00076308982034

Alternative ID

PLG4

3M™ Fire Barrier Plug Two Inch, Howard Berg, 02-2016

3M™ Fire Barrier Plug PLG2, 2 in, Maroon, 4/Case

3M Stock

7010353409

UPC

00076308981266

Alternative ID

PLG4

3M(TM) Smoke and Sound SS 100 20 oz Sausage image- last updated 1/17/2013, owner Ted Colwell 651-733-6683

3M™ Smoke and Sound Sealant SS-100, White, 20 fl oz Sausage Pack, 12/Case

3M Stock

7100038650

Previous 3M Stock

98040056362

UPC

00051115549236

Alternative ID

SS-100

3M™ Interam™ Mat I-10

Options available