webLoaded = "false" Loadclientside=No

Changing Surface Properties for Better Adhesion

webLoaded = "false"

If it is challenging to adhere to a material due to its low surface energy, it is very critical to choose the correct adhesive to bond that material. There are various ways to increase the surface energy of a material, improving the ability to bond. Here are several different ways to modify surface energy.

  • Primers improve the ability of a liquid to chemically interact at the surface of a substrate

    Priming

    The ability of a liquid to chemically interact at the surface can be improved with primers or adhesion promoters. Primers work by adding a monolayer or thin coating of a functional material to the surface. Primers are chemically designed so that one end of the molecules bond very well to low-surface-energy materials while the free end bonds very well to adhesives.

  • Learn how plasma treating can be used to modify surface energy

    Plasma Treating

    Plasma treatments expose the surface of a material to an ionized gas which changes the chemical reactivity of the surface atoms. There are several different varieties of plasma treating, and there many different companies specializing in plasma-treatment services.
  • Learn how flame treating can be used to modify surface energy

    Flame Treating

    Flame treatment takes advantage of the combustion chemistry of a “flame” to chemically alter the surface atoms of a substrate. As with plasma treatments, there are a variety of companies specializing in flame treatment for different materials.

webLoaded = "false"

Surface Cleanliness

Although we just spent a great deal of time understanding the intricacies of surface energy of materials, in reality, a material to be bonded will arrive with a surface that has been contaminated. This can include dust, oil, grease, fingerprints or any other debris capable of winding up on a surface.

  • Contamination can result in:

    • Reduced contact between adhesive and substrate, preventing a bond
    • De-tackified adhesive, preventing effective wet out
    • Reduced bond strength
webLoaded = "false"
  • A clean surface allows for maximum wet out and surface contact potential

    Effective Wet Out

    Clean surface allows for maximum wet out and surface contact potential

  • A contaminated surface inhibits surface contact and wet out potential

    Ineffective Wet Out

    A contaminated surface inhibits surface contact and wet out potential

webLoaded = "false"
  • It is very often necessary to thoroughly clean material prior to bonding to guarantee the adhesive is making proper contact. There are a few methods to do this:
     

    • Use a mixture of 50/50 isopropyl alcohol (IPA)/water. This is generally adequate for plastics which don’t require oily coatings to protect their integrity.
    • Clean with harsher solvents, including acetone or methyl-ethyl ketone (MEK). Many metals arrive with an oily coating that is present to prevent oxidation (rust) or as a result of processing (e.g. lubricants).
    • Degrease with an industrial degreaser, followed by solvent cleaning. This is often reserved for metals that are not only coated with processing oil, but also very dirty.

webLoaded = "false" Loadclientside=No

Abrading – When Cleaning isn’t enough

There are times when cleaning alone is not capable of removing the contaminants on the surface of a material. Injection-molded plastics may contain traces of mold release agents that are designed to resist many solvents. Oxide layers of metals (e.g. rusted iron) are “bonded” to the surface and cannot be removed by solvent cleaning alone. Some industrial oils are resistant to solvents and chemicals with the goal of keeping a metal surface safe from harm during transit.

webLoaded = "false"
  • Example of a surface with no preparation, prior to bonding

    Surface with no preparation

  • Example of a surface after one cleaning, prior to bonding

    Surface after 1st cleaning

webLoaded = "false" Loadclientside=No

Surface Preparation Process Using Abrading

To prepare a surface adequately for bonding, it may be necessary to add an abrasion step to the process.

1. Clean first – a first round of cleaning can remove much of the contamination present and will prevent debris from smearing during abrasion.

2. Abrade – abrasion with standard abrasive paper or non-woven abrasive pads can remove the contaminated surface and provide roughness.

3. Clean – final cleaning removes any debris left over from abrasion and provides the new, clean surface for bonding.

webLoaded = "false"
  • Example of a surface after abrasion, prior to bonding

    Surface after abrasion

  • Example of a surface after two cleanings, prior to bonding

    Surface after 2nd cleaning


webLoaded = "false"

Related education articles


Connect With Us
We're here to help.

Need help finding the right product for your project? Contact us if you need product, technical or application advice or want to collaborate with a 3M technical specialist, or give us a call at 1-800-831-0658.

Need help finding the right product for your project? Contact us if you need product, technical or application advice or want to collaborate with a 3M technical specialist, or give us a call at 1-800-831-0658.

Close  

Industrial Adhesives & Tapes | Ask A 3M Expert



Thank you for your interest! Please complete the form below to receive your tape or adhesives sample or enter your question or comment below.


Industrial Users Only


Disclaimer: The 3M Industrial Sample Request Program is not available to consumers or the general public. We reserve the right to disqualify without notification any sample request that does not appear to be for industrial manufacturing purposes. Samples are available to U.S. industrial customers only. Only one sample per qualified customer. You will be contacted to verify your request. If you are a 3M Distributor, contact your 3M Sales Representative. Quantities available while supplies last.


We will respond to your email request in 24 - 48 business hours.


All fields are required unless indicated optional


  •  
  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers. Please be aware that this information may be stored on a server located in the U.S. If you do not consent to this use of your personal information, please do not use this system.

  • Submit

Thank You

Thank you for your interest in 3M Industrial Adhesives & Tapes products. A 3M representative will contact you shortly regarding your inquiry.

Our Apologies...

An error has occurred while submitting. Please try again later...

CHAT WITH US
Follow Us
Change Location
United States - English