- Self-sharpening pyramids start sharp, stay sharp, and run cooler than conventional abrasives
- Flexible backing flows over contoured surfaces for consistent finishing
- Three-dimensional design enables very consistent finishes throughout the abrasive life in robotic applications
- Ideal for intermediate finishing and fine polishing prior to plating or buffing
|
Attribute Name
|
Value
|
|---|---|
|
Abrasive Material
|
Aluminum Oxide
|
|
Alternative Sale Availability
|
6. This item is for industrial use only and there are no VOC restrictions.
|
|
Application
|
Finishing, Polishing
|
|
Backing Material
|
Rayon Cloth
|
|
Backing Weight
|
JE Weight
|
|
Brand
|
Trizact™
|
|
Color Family
|
Gray
|
|
Equipment - Machines
|
Bench Top Motors, File Belt Sanders, Manual Backstand, Pressure Assit Backstand, Robotics
|
|
Form Type
|
Scalloped Edge
|
|
For Use On
|
Aluminum, Brass, Carbon Steel, Cobalt & Nickel Alloy, Copper, High Nickel Alloy, Soft Metals, Stainless Steel
|
|
Industries
|
Marine, Metalworking
|
|
Micron Grade
|
Micron Grade, A16, A30, A45, A5, A65, A80
|
|
Overall Length (Imperial)
|
118 in, 120 in, 132 in, 148 in, 15.5 in, 168 in, 17.75 in, 18.93 in, 240 in, 32 in, 36 in, 42 in, 48 in, 60 in, 72 in, 76 in, 77 in, 83 in, 90 in, 96 in
|
|
Overall Length (Metric)
|
1066.8 mm, 1219.2 mm, 1524 mm, 1828.8 mm, 1930.4 mm, 1955.8 mm, 2108.2 mm, 2286 mm, 2438.4 mm, 2997.2 mm, 3048 mm, 3352.8 mm, 3759.2 mm, 393.7 mm, 4267.2 mm, 450.85 mm, 480.822 mm, 6096 mm, 812.8 mm, 914.4 mm
|
|
Overall Width (Imperial)
|
0.094 in, 0.5 in, 0.75 in, 1 in, 1.25 in, 1.5 in, 1.68 in, 1.87 in, 2 in, 2.25 in, 2.37 in, 2.5 in, 3 in, 3.5 in, 4 in
|
|
Overall Width (Metric)
|
101.6 mm, 12.7 mm, 19.05 mm, 2.388 mm, 25.4 mm, 31.75 mm, 38.1 mm, 42.672 mm, 47.498 mm, 50.8 mm, 57.15 mm, 60.198 mm, 63.5 mm, 76.2 mm, 88.9 mm
|
|
Product Color
|
Gray
|
|
Product Form
|
Belt
|
|
Splice Type
|
Film-lok
|
|
Substrate
|
Aluminum, Brass, Carbon Steel, Cobalt & Nickel Alloy, Copper, High Nickel Alloy, Soft Metals, Stainless Steel
|
- Self-sharpening pyramids start sharp, stay sharp, and run cooler than conventional abrasives
- Flexible backing flows over contoured surfaces for consistent finishing
- Three-dimensional design enables very consistent finishes throughout the abrasive life in robotic applications
- Ideal for intermediate finishing and fine polishing prior to plating or buffing
- Produces finer finishes than conventional electrostatically coated abrasives
3M™ Trizact™ Cloth Belt 307EA uses our proprietary microreplication technology where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.
Stainless steel finishing application
Controlled Breakdown, Medium Pressure
The abrasive and resin structure for the 3M™ Trizact™ Cloth Belt 307EA is formulated to break down under medium pressure and keep fresh, sharp mineral cutting to provide consistent finishes on hard metals such as carbon and stainless steel. The belt also features a grinding aid that helps prevent heat buildup, warping and discoloration.
The belt is constructed on a durable cloth backing that helps provide control, conformability and effective medium-pressure grinding. The resin bonded abrasive gives you greater heat resistance and helps prevent delamination.
Smooth Running, Fine Finish
The belt uses a Film Media Splice, a strong secure bond joining the belt ends, consisting of a thin film-joining media that minimizes "chatter marks," ensures a smooth running belt, and consistent finishing results. When compared to conventional abrasive products, proprietary Trizact™ abrasives produce a finer finish, achieve results faster, and last longer.
As 3M™ Trizact™ "pyramids" wear, fresh abrasive mineral is constantly exposed to the workpiece, resulting in faster, more consistent cutting throughout the life of the belt.
Ideal for Robotic Finishing and Polishing
Robotic metal polishing demands the most consistent, refined cut and long abrasive life. 3M™ Trizact™ abrasives can consistently deliver near-mirror finishes while also delivering the abrasive life that helps reduce changeouts and downtime in robotic cells. This helps maximize the efficiency of the cell, allowing you to produce more parts per belt.
The 3M™ Trizact™ Advantage
Unlike conventional abrasives, our line of 3M™ Trizact™ belts start sharp and stay sharp, resulting in more predictable finishes and improved, consistent quality. 3M™ Trizact™ belts can last up to five times longer than conventional belts and provide precise finish control such that operators can reduce grade sequences, requiring fewer process steps and fewer abrasive products.
Three-dimensional structures uniformly distributed over the entire surface of 3M™ Trizact™ abrasives ensure consistent performance and eliminate part to part variation.
For industrial/occupational use only. Not for consumer sale or use.
