3M™ Adjustable Paint Masking Applicator delivers fine-tuned masking

How to Replace the Cutter Block Video opens with high-energy music and an animated, three-dimensional 3M� Adjustable Paint Masking Applicator. Music continues throughout video. The applicator appears to be floating in the air within an animated showroom, lit with blue neon lights. Text on-screen: 3M� Adjustable Paint Masking Applicator How to Replace a Cutter Block The applicator floats on the right side of the screen. Text appears on left side: Replacing the cutter block is fast and easy. The applicator floats to show the back side, with the handle on the right. A black bar appears across the bottom of the screen, with white text: To replace the cutter block, The applicator flips over so the handle is on the left and a roll of blue tape is visible. Two screws are visible on the bottom part of the applicator, which is facing front. Text appears in the black bar: turn the applicator over to locate the two screws. A close-up shows a small wrench turning in the screw. Text appears in the black bar: Remove the two screws using a 3/32� hex key. A second wrench appears and inserts into the second screw. The two hex keys turn quickly until the screws come out and float off screen. The view switches to the other side of the applicator. Text appears in the black bar: Remove the cutter block on the opposite side. The cutter block, which has the 3M logo on it, pulls outward toward the viewer. The angle shifts to show the pulled-out cutter block hovering above the applicator handle. A triangle with an exclamation point inside in appears on screen, along with text: Caution The blade is sharp. Text appears in the black bar: Use caution when removing the cutter block. A close-up of the cutter block hovers over the handle and then slides into place in the applicator. Text appears in the black bar: Place a new cutter block in the groove. The applicator is shown floating and flipping over slowly. Text appears: Hold securely. Flip the applicator over. Two hex keys attached to screws appear to fly into the two screw holes on the applicator, spinning as they go. Text appears: Replace the two screws. The hex keys fly away. A new angle shows the applicator moving along the edge of a red animated car, dispensing tape. Text appears: Tighten, and you�re ready to work. The tape and applicator roll up across the car�s roofline. Then it transitions to the applicator again floating in the air in the showroom, with blue neon lights behind it. The black bar is gone. Text appears on screen: Trust 3M�s comprehensive line of masking solutions The camera pans around the applicator in a 360-degree view, with the screws and cutter block popped out. Then the animated red car is visible, with blue tape lining the roofline. The line of blue tape releases as if being pulled up. Text appears on screen: for the performance you need to finish the job right A close-up of the red animated car. Text appears on the car�s black roof: the first time. A glitch video effect appears and the entire red car is visible. Text appears on screen: Mask It Better With 3M Paint Masking Solutions. The �3M Science. Applied to Life.� logo appears on a black screen. Text appears: Go to 3M.com/Automasking or contact your local 3M representative. Small print on bottom of screen: � 3M 2021. All rights reserved. 3M and 3M Science Applied to Life are trademarks of 3M Company.