3M™ Cold Shrink Splice Kit 5551-3C-AC, 3/C, 5kV and 8kV, 6 - 3/0 AWG copper or aluminum, 1/case
- Part Number 5551-3C-AC
- 3M ID 7000006190
- UPC 00051128543177
Details
Highlights
- Use for splicing 5 kV and 8 kV shielded or non-shielded, armored or non-aromored, solid dielectric, power cables
- Each kit makes one 3/C splice
- Cold Shrink Insulator and Jacket: Factory formed EPDM installs quickly and void free
- Factory formed components: No thickness measuring necessary
- Constant Force Spring: No soldering required for shield ground connections
- Shielding Braid Sleeve: Single component provides 2 functions, metallic insulation shield and ground jumper
- No special tools required for installation
- Kit cotents (3 splices per kit): * 3 x cold shrink insulators, 3 x cold shrink splice jackets, 3 x Scotch 13 Electrode Wraps, 3 x rolls Scotch® Rubber Mastic Tape 2228, 3 x rolls Scotch® Electrical Semi-Conducting Tape 13, 3 x shielding braid sleeves, 6 x constant force springs, 3 x cleaning pad kits, 1 x roll Scotch® Linerless Rubber Splicing Tape 130C, 1 x roll Scotch® Electrical Shielding Tape 24, 3 x instruction sheets
3M™ Cold Shrink/Sheath Wrap, Armored or Non-Armored Splice Kit 5551-3C-AC is for splicing 3/C, 5/8 kV shielded, armored and non-armored cables. Connectors are not included. Kits include Sheath Wrap to reconstitute the cable’s armor. Meets the requirements of IEEE 404. Each kit makes one 3/C splice.
3M™ 5551 3C AC Series Cold Shrink Resin Inline Splice Kit contains Armorcast™ structural material to reconstitute the cable's armor. This kit contains 6 copper tape strips, 3 Scotch® electrode wraps 13, 3 cold shrink insulators, 3 shielding braid sleeves, 6 small constant force springs, 2 large constant force springs and more. IEEE Approved.
Typical properties
Resources
Similar products
| Voltage | 5 kV, 8 kV | |||
| Number of Conductors | 3 | |||
| Cable Shielding | Tape Shield | |||
| Splice Type | Inline | |||
| Insulation Outer Diameter (Metric) | 9.398 mm, 9.652 mm, 9.906 mm, 10.16 mm, 10.414 mm, 10.668 mm, 10.922 mm, 11.176 mm, 11.43 mm, 11.684 mm, 11.938 mm, 12.192 mm, 12.446 mm, 12.7 mm, 12.954 mm, 13.208 mm, 13.462 mm, 13.716 mm, 13.97 mm, 14.224 mm, 14.478 mm, 14.732 mm, 14.986 mm, 15.24 mm, 15.494 mm, 15.748 mm, 16.002 mm, 16.256 mm, 16.51 mm, 16.764 mm, 17.018 mm, 17.272 mm, 17.526 mm, 17.78 mm, 18.034 mm, 18.288 mm, 18.542 mm, 18.796 mm, 19.05 mm, 19.304 mm, 19.558 mm, 19.812 mm | |||
| Insulation Outer Diameter (Imperial) | 0.37 in, 0.38 in, 0.39 in, 0.4 in, 0.41 in, 0.42 in, 0.43 in, 0.44 in, 0.45 in, 0.46 in, 0.47 in, 0.48 in, 0.49 in, 0.5 in, 0.51 in, 0.52 in, 0.53 in, 0.54 in, 0.55 in, 0.56 in, 0.57 in, 0.58 in, 0.59 in, 0.6 in, 0.61 in, 0.62 in, 0.63 in, 0.64 in, 0.65 in, 0.66 in, 0.67 in, 0.68 in, 0.69 in, 0.7 in, 0.71 in, 0.72 in, 0.73 in, 0.74 in, 0.75 in, 0.76 in, 0.77 in, 0.78 in |
3M™ Cold Shrink Splice Kit 5551-3C-AC, 3/C, 5kV and 8kV, 6 - 3/0 AWG copper or aluminum, 1/case
3M™ Cold Shrink Shielded Splice Kits 5550 Series
3M™ Cold Shrink Quick Splice Kits QSLV-M Series
3M™ Cold Shrink Inline Splice Kits 5730 SeriesLegal disclaimer
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
