3M™ Cold Shrink Splice Kit 5551-3C-AC

  • Options available
  • | Select product options for IDs.
View more details

Details

3M™ Cold Shrink/Sheath Wrap, Armored or Non-Armored Splice Kit 5551-3C-AC is for splicing 3/C, 5/8 kV shielded, armored and non-armored cables. Connectors are not included. Kits include Sheath Wrap to reconstitute the cable’s armor. Meets the requirements of IEEE 404. Each kit makes one 3/C splice. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Typical properties

Resources

Similar products

Voltage 5/8 kV, 5 kV, 8 kV
Number of Conductors 1 , 3
Cable Shielding Wire Shield, Tape Shield, UniShield®
Splice Type Inline, Cold Shrink
Insulation Outer Diameter (Metric) 19.05 mm, 18.288 mm, 18.542 mm, 18.796 mm, 10.16 mm, 10.668 mm, 10.414 mm, 10.922 mm, 11.176 mm, 11.43 mm, 14.732 mm, 14.986 mm, 15.24 mm, 15.494 mm, 15.748 mm, 16.002 mm, 16.256 mm, 9.398 mm, 19.304 mm, 19.558 mm, 19.812 mm, 9.652 mm, 11.684 mm, 12.446 mm, 12.7 mm, 13.462 mm, 12.954 mm, 13.208 mm, 16.51 mm, 17.272 mm, 17.526 mm, 17.78 mm, 18.034 mm, 9.906 mm, 13.716 mm, 13.97 mm, 14.224 mm, 14.478 mm, 16.764 mm, 17.018 mm, 11.938 mm, 12.192 mm
Insulation Outer Diameter (Imperial) 0.45 in, 0.46 in, 0.52 in, 0.47 in, 0.48 in, 0.49 in, 0.53 in, 0.54 in, 0.55 in, 0.5 in, 0.51 in, 0.56 in, 0.59 in, 0.6 in, 0.61 in, 0.57 in, 0.58 in, 0.62 in, 0.63 in, 0.64 in, 0.65 in, 0.66 in, 0.67 in, 0.68 in, 0.69 in, 0.7 in, 0.71 in, 0.72 in, 0.73 in, 0.74 in, 0.79 in, 0.8 in, 0.75 in, 0.81 in, 0.76 in, 0.77 in, 0.82 in, 0.83 in, 0.84 in, 0.85 in, 0.78 in, 0.86 in, 0.87 in, 0.88 in, 0.38 in, 0.37 in, 0.4 in, 0.39 in, 0.41 in, 0.42 in, 0.43 in, 0.44 in
Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.