1. United States
  2. All 3M Products
  3. Electrical
  4. Splices & Accessories
  5. Cold Shrink Splices
  6. 3M™ Cold Shrink Rubber Splice Kit 5551, Tape, Wire, Unishield, 5/8 kV, Standard, 1/case

3M™ Cold Shrink Rubber Splice Kit 5551, Tape, Wire, Unishield, 5/8 kV, Standard, 1/case

  • Part Number 5551
  • 3M ID 7000006046
  • UPC 00054007090892
View more details
Frequently viewed resources
Tech Data Sheet (PDF, 50KB)Safety Data Sheet (PDF, 0B)
Voltage 5/8 kV, 5 kV, 8 kV
Number of Conductors 1
Cable Shielding Wire Shield, Tape Shield, UniShield®
Splice Type Inline, Cold Shrink
Insulation Outer Diameter (Imperial) 0.45 in, 0.46 in, 0.52 in, 0.47 in, 0.48 in, 0.49 in, 0.53 in, 0.54 in, 0.55 in, 0.5 in, 0.51 in, 0.56 in, 0.59 in, 0.6 in, 0.61 in, 0.57 in, 0.58 in, 0.62 in, 0.63 in, 0.64 in, 0.65 in, 0.66 in, 0.67 in, 0.68 in, 0.69 in, 0.7 in, 0.71 in, 0.72 in, 0.73 in, 0.74 in, 0.79 in, 0.8 in, 0.75 in, 0.81 in, 0.76 in, 0.77 in, 0.82 in, 0.83 in, 0.84 in, 0.85 in, 0.78 in, 0.86 in, 0.87 in, 0.88 in

Details

3M™ Cold Shrink/Sheath Wrap, Armored or Non-Armored Splice Kit 5551-3C-AC is for splicing 3/C, 5/8 kV shielded, armored and non-armored cables. Connectors are not included. Kits include Sheath Wrap to reconstitute the cable’s armor. Meets the requirements of IEEE 404. Each kit makes one 3/C splice. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

3M™ 5550 Series Cold Shrink Tape Inline Splice Kit includes 3 each of cold shrink insulators, splice jackets and shielding braid sleeves, cleaning pad kits and more. The insulator and jacket included in this kit are made of specially formulated EPDM that provides quick installation. It has a shielding braid sleeve that offers 2 functions, metallic insulation shield and ground jumper. This kit is perfect for use with Scotchlok™ 10000, 11000 and 20000 Series inline compression connectors or any UL Listed inline compression connector. IEEE Approved.

Typical properties

Resources

Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.