1. United States
  2. All 3M Products
  3. Tapes
  4. Release Liners
  5. 3M™ Secondary Liner 4998, Neutral, 4.2 mil, Roll, Config

3M™ Secondary Liner 4998, Neutral, 4.2 mil, Roll, Config

  • 3M Product Number 4998
  • 3M ID 7100012626

For selective die-cutting

Silicone release coating

Release coating on both sides. The matte side is low release the gloss side is medium release.

View more details
Frequently viewed resources
Tech Data Sheet (PDF, 464KB)
Ask a 3M Expert

Details

Highlights
  • For selective die-cutting
  • Silicone release coating
  • Release coating on both sides. The matte side is low release the gloss side is medium release

3M™ Secondary Liner 4998 is a neutral colored, 58 lb polycoated kraft liner. Release coat on two sides. Use as secondary liner for laminating adhesiveswhen selectively die-cutting.

Release coat on two sides (matte). Use as secondary liner for laminating adhesives when selectively die-cutting.

Typical properties

Resources

Reviews

Large Volume Order

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.