Ask a 3M Expert
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Converter Markets Representative or a 3M Preferred Converter will contact you by phone or email.
3M™ Secondary Liner 7526L, Tan, 4.2 mil, Roll, Config
- 3M Product Number 7526L
- 3M ID 7100072921
Details
Highlights
- For use with screen printable adhesives
- 4.2 mil 58# polycoated kraft provides moisture stability, resists wrinkling and curling
- Designed with a silicone release coating on two sides
- Gloss side (inside of roll) provides medium release level
- Matte side (outside of roll) provides low release level
3M™ Secondary Release Liner 7526L is a tan-colored, 4.2 mil polycoated kraft liner with a release coating on both sides, designed specifically for use with 3M screen printable adhesives. This liner is designed to provide moisture stability and resist wrinkling and curling. This secondary release liner is commonly used for downstream processing and/or stacking.
3M™ Secondary Release Liner 7526L is designed to resist wrinkling and curling
3M™ Secondary Release Liner 7526L (PDF, 11.92 Kb) is a tan-colored, 58# polycoated kraft (PCK) liner with a release coating on both sides. The gloss side (interior of roll) features a medium release silicone while the matte side has low release silicone for use with screen printable adhesives. This 4.2 mil liner resists wrinkling and curling. 3M™ Secondary Release Liner 7526L is designed to help to protect 3M screen printable adhesives during downstream processing or stacking.
Recommended applications
- Hard tool die-cutting
- Screen-printing liner
- Wide web lamination
Application Techniques for Secondary Liners
A pressure of 1.5-2.0 psi is suggested during lamination to allow the adhesive to come into direct contact with the liner. Using a hard-edged plastic tool or roller, which is the full width of the laminated tape or part, helps to provide the necessary pressure at the point of lamination. The ideal adhesive application temperature range is 60°F (15°C) to 100°F (38°C).
Innovative Solution for the Printing World
In order to meet today's complex printing world, 3M designed more than 150,000 combinations of adhesives, topcoats, facestocks and liners to meet industry demands. 3M™ Secondary Release Liner 7526L is one of these innovative solutions engineered to provide a technical solution and superior product that will help enhance your customers' confidence in their image, product and process.
Typical properties
Resources
Reviews
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
