Scotch-Brite™ Surface Conditioning Roll

  • Options available
  • | Select product options for IDs.

Available in a variety of sizes and grades to meet various project requirements

Color coded by grade to reduce risk for error

Works well on metal, plastics and composites

View more details
Frequently viewed resources
Safety Data Sheet (PDF, 0B)


  • Available in a variety of sizes and grades to meet various project requirements
  • Color coded by grade to reduce risk for error
  • Works well on metal, plastics and composites
  • Works well on metal, plastics and composites
  • Open web responds to surface irregularities while minimizing the geometry alteration on the part

Scotch-Brite™ Surface Conditioning Roll effectively blends, deburrs, finishes and cleans a variety of substrates. It can also be used for light grinding. The versatility of the Scotch-Brite™ Surface Conditioning Roll makes it a good all-purpose product.


Scotch-Brite™ Surface Conditioning Roll
Non-woven material combined with abrasive grain is an ideal way to add a great finish or remove burrs without gouging or undercutting the workpiece

The Many Benefits of Open Web Abrasives
Our Scotch-Brite Surface Conditioning Roll has all the benefits operators expect from our Scotch-Brite™ products, including non-woven abrasive technology and a consistent cut. It is available in aluminum oxide or silicon carbide mineral, as well as a range of grade from super fine (SFN) to coarse (CRS). Super fine grades will cut less aggressively and produce a finer finish whereas coarse grades will cut more aggressively and produce a coarser finish. We offer our Scotch-Brite™ Surface Conditioning Roll in a variety of grades and minerals so operators may find the product best suited to their specific project needs.

Non-woven technology makes our Scotch-Brite™ abrasives unique. We intersperse abrasive mineral on synthetic fibers using resin — creating an open web construction. Spaces between the fibers permit excess material to escape, so the mineral does not get worn down by debris. It keeps the mineral cutting sharper longer, enhancing cut performance and increasing abrasive service life. The spring-like nature of the fibers works well on contours and responds to subtleties on the surface. Its responsive design effectively removes unwanted burrs, soils and contaminants without ruining the base material, so you get a consistent and uniform finish — part after part.


Typical properties



Large Volume Order

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.