3M™ Diamond Cloth Belt 674W

  • Options available
  • | Select product options for IDs.

Diamond mineral provides consistent stock removal and finishes on hard-to-grind materials

Heavy-duty cloth backing supports aggressive stock removal on hard materials

Water-resistance enables wet applications for cooler grinding and generally longer abrasive life

View more details
Frequently viewed resources
PDF (1) Copy 26Safety Data Sheet (PDF, 0B)

Details

Highlights
  • Diamond mineral provides consistent stock removal and finishes on hard-to-grind materials
  • Heavy-duty cloth backing supports aggressive stock removal on hard materials
  • Water-resistance enables wet applications for cooler grinding and generally longer abrasive life
  • Available in 120mesh and 220mesh for a variety of removal and finish requirements
  • Available in small belt sizes

3M™ Diamond Cloth Belt 674W was designed for hard-to-grind materials. Diamond mineral is resin-bonded to a durable, water-resistant cloth backing for use with coolants or used dry.

Water-resistant backing performs well in both wet and dry applications.
Water-resistant backing performs well in both wet and dry applications
Longer-Lasting, Keeps on Cutting
Our 3M™ Diamond Cloth Belt 674W abrasives are designed to provide long-lasting cutting performance when used for finishing ceramics, carbides and hard coated materials.

Compared to flexible metal bond diamond abrasives, 3M Diamond Cloth Belts 674W generally last longer and deliver a faster, more consistent cut.

Learn More about 3M™ Diamond Cloth and Other Suberabrasives (PDF, 1.95 Mb)

Use Wet for a Finer Finish and Longer Abrasive Life
While it can be run dry, achieve optimum results when you use this diamond abrasive belt with a coolant. Water is a desirable when grinding or polishing with diamond abrasives, since it efficiently cools both the work and the abrasive. Use with a coolant minimizes any risk of thermal damage.

3M™ Diamond Cloth Belt 674W abrasives are designed to provide long-lasting cutting performance when used for finishing ceramics, carbides and hard coated materials.
Available in small belt sizes
Recommended Applications
3M™ Diamond Cloth Belt 674W is an excellent choice for finishing and dimensioning a variety of hard-to-grind materials, including tungsten carbide and chrome carbide, thermal sprays, yttria-stabilized zirconia and alumina ceramics, and carbon fiber epoxy composites.

It also easily removes coating oversprays and coatings prior to part refurbishment.

Discover More Solutions for Hard-to-Grind Materials (PDF, 11.17 Mb)

Typical properties

Resources

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.