3M™ Modular Splicing Kits
- | Select product options for IDs.
Details
Highlights
- Splices tape shield, wire shield, UniShield® and JCN cables
- Suitable for use with a splicing kit, tap splicing kit, equipment kit and dead-end kit
- ANSI Certified and IEEE Approved
- Splices both aluminum and copper conductors
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with the 3M Modular Splicing System 5815 Series that is rated for 5 to 25 kV and 600 amp industrial shielded power cables.
3M™ Modular Splicing Kit 5815 includes 1 cable adapter, 1 aluminum compressed connector, 1 cold shrink jacketing tube, 2 silicone lubricants and more. It provides installation information for wire shield, tape shield, UniShield® and jacketed concentric, neutral type solid dielectric cables. For use with 5815 kits to provide for It is suitable for dead ending, splicing and connecting to dead front apparatus like switches, switchgear and transformers that are equipped with bushings. It has an insulating plug that provides a safe means of testing the circuit without disturbing the bolted connection. Simply adding or removing modular components helps the system for future modification. Meets ANSI/IEEE Standard 386.
Typical properties
Resources
Similar products
Current product  3M™ Modular Splicing Kits | ||
|---|---|---|
| Conductor Sizes (Imperial) | 1 AWG, 2 AWG, 1/0 AWG, 3/0 AWG, 4/0 AWG, 250 kcmil, 1000 kcmil | |
| Insulation Diameter Range | 1.080-1.280 in, 0.980-1.140 in, 0.785-0.970 in, 1.640-1.840 in, 1.220-1.420 in, 0.910-1.065 in, 0.640-0.760 in | |
| Insulation Diameter Range (Metric) | 27.4-32.5 mm, 24.9-29.0 mm, 19.9-24.6 mm, 41.7-46.7 mm, 31.0-36.1 mm, 16.3-19.3 mm | |
| Minimum Insulation Outer Diameter (Metric) | 16.3 mm, 19.9 mm, 24.9 mm, 27.4 mm, 31 mm, 45.2 mm | |
| Minimum Insulation Outer Diameter (Imperial) | 0.64 in, 0.785 in, 0.98 in, 1.08 in, 1.22 in, 1.78 in | |
| Cable Voltage Rating | 15 kV, 25 kV |
3M™ Modular Tap Splice KitsLegal disclaimer
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
