3M™ Modular Add On Tap Splicing Kit contains all the accessories to tap onto an existing dead end or to combine with a 3M™ Modular Splice 5815 S for a 3 way installation, all without disturbing the original connection. This kit can be connected with a 5815 E kit for connecting parallel feeds. This kit is rated for 5 to 25 kV and 600 amps.
3M™ Modular Add On Tap Splicing Kit contains 1 tee module, 1 connecting plug, 1 connecting stud, 1 instruction booklet and silicone lubricant. This kit can accommodate stranded aluminum conductors and copper conductors. Meets ANSI/IEEE Standard 386.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.