3M™ Scotch-Weld™ Epoxy Adhesive DP110, Gray, 48.5 mL Duo-Pak, 12/Case
- Part Number 110
- 3M Product Number 110
- 3M ID 7100148777
- UPC 00638060089903
Solve engineering, materials, and process challenges with Ask 3M, an AI technical assistant verified on 3M knowledge. Ask, don't search.
Details
Highlights
- FLEXIBLE STRUCTURAL BOND: A flexible, fast-setting two-part epoxy that delivers strong adhesion across a variety of substrates
- LOW-VISCOSITY FLOW: Dispenses and self-levels easily while maintaining high shear and peel strength
- FAST WORK LIFE: Offers a 8–13-minute worklife that allows repositioning for accurate part placement
- EASY MIXING: Dispenses at a 1:1 mix ratio to help simplify proportioning
- VERSATILE BONDING: Bonds metals, ceramics, concrete, composites, wood, and many plastics
- ADAPTABLE CURE: Fully cures in 48 hours at 73 °F (23 °C) or can accelerate bond with heat up to 200 °F (93 °C)
- DURABLE PERFORMANCE: Balances flexibility and strength, to provide a durable performance that helps keep bonds intact
- PRODUCT OPTIONS: Available in Duo-Pak (DP) and bulk containers, compatible with 3M dispensing equipment
3M™ Scotch-Weld™ Epoxy Adhesive DP110 Gray is a flexible, fast-setting, two-part epoxy adhesive delivering strong adhesion to a variety of substrates. Dispensing as a gray, flowable adhesive, it provides a 8–13-minute worklife that allows time for repositioning and accurate part placement before cure. It reaches handling strength in approximately 20 minutes, making it well suited for general-purpose bonding applications across a range of industries where both handling speed and cured flexibility are beneficial.
Formulated with a modified epoxy base and amine accelerator, 3M™ Scotch-Weld™ Epoxy Adhesive DP110 Gray mixes at a 1:1 ratio, helping simplify proportioning. Its low viscosity allows for easy dispensing and self-leveling, while maintaining high shear and peel strength. It reaches full cure in 48 hours at room temperature — 73 °F (23 °C) — and can be heated up to 200 °F (93 °C) to help accelerate curing, providing flexibility for variable curing workflows. Cured bonds provide a balance of flexibility and strength that provide durability in demanding environments. It is available in a Duo-Pak (DP) and bulk formats. Its compatibility with 3M dispensing equipment can automate mixing and measuring to support repeatable results in high-volume production environments. By combining rapid handling strength with flexible, durable performance, 3M™ Scotch-Weld™ Epoxy Adhesive DP110 Gray helps manufacturers keep production moving, with confidence and consistency.
Typical properties
Resources
Reviews
Support
Ask a 3M Expert
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
