United States
All 3M Products
Electrical
Splices & Accessories
Cold Shrink Splices
3M™ Cold Shrink Splice Transition Kits MT-C, Armored or non-armored, shielded power cables, 1/case

3M™ Cold Shrink Splice Transition Kits MT-C, Armored or non-armored, shielded power cables, 1/case

Part Number MT-C
3M ID 7100136956
UPC 50051128552082,00051128552087

Compatible to use with cold shrink QS-III splicing Series 5700A-MT

Rated up to 5/8 kV

Frequently viewed resources

Conductor Sizes (Imperial)	2/0 AWG
Insulation Outer Diameter (Metric)	28.702 mm, 27.432 mm, 27.686 mm, 27.94 mm, 28.194 mm, 28.448 mm, 26.416 mm, 26.67 mm, 26.924 mm, 27.178 mm, 21.844 mm, 22.098 mm, 22.352 mm, 22.606 mm, 15.748 mm, 16.002 mm, 16.256 mm, 16.51 mm, 16.764 mm, 17.018 mm, 17.272 mm, 17.526 mm, 17.78 mm, 18.034 mm, 18.288 mm, 18.542 mm, 21.336 mm, 19.812 mm, 20.066 mm, 20.32 mm, 20.574 mm, 20.828 mm, 21.082 mm, 21.59 mm, 22.86 mm, 23.114 mm, 23.368 mm, 23.622 mm, 23.876 mm, 24.13 mm, 24.384 mm, 24.638 mm, 18.796 mm, 19.05 mm, 19.304 mm, 19.558 mm, 24.892 mm, 25.146 mm, 25.4 mm, 25.654 mm, 25.908 mm, 26.162 mm
Insulation Outer Diameter (Imperial)	0.93 in, 0.94 in, 0.95 in, 0.96 in, 0.66 in, 0.67 in, 0.68 in, 0.69 in, 0.71 in, 0.72 in, 0.73 in, 0.74 in, 0.75 in, 0.76 in, 0.77 in, 0.78 in, 0.79 in, 1.05 in, 1.06 in, 1.07 in, 1.08 in, 1.09 in, 1.11 in, 1.12 in, 1.13 in, 1.1 in, 1 in, 0.97 in, 0.98 in, 0.99 in, 0.9 in, 1.01 in, 1.02 in, 1.03 in, 1.04 in, 0.7 in, 0.81 in, 0.82 in, 0.83 in, 0.84 in, 0.85 in, 0.86 in, 0.87 in, 0.88 in, 0.89 in, 0.8 in, 0.91 in, 0.92 in, 0.62 in, 0.63 in, 0.64 in, 0.65 in
Conductor Sizes (Metric)	70 mm²

Where to Buy

Specifications

Details

Highlights

Compatible to use with cold shrink QS-III splicing Series 5700A-MT
Rated up to 5/8 kV

3M™ Cold Shrink MT-C and MT-E Trifurcating Accessory Kits are used to break out and seal a transition from 3/C to three 1/C. For use with 3M™ Cold Shrink QS-III Splicing Series 5700A-MT. NOTE: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Resources

Legal disclaimer

Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.