3M™ Cold Shrink QS-III Splice Kit 5525A-500-CU, Tape, Wire, Unishield, 25/28 kV, Standard, 1 per case
- Part Number 5525A-500-CU
- 3M ID 7100164903
- UPC 00054007429036
Details
Highlights
- Inline splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- Designed for inline splicing, feeder and distribution circuits, size transition splicing, direct burial installations and submerged locations
- Cable has 1.07 to 1.7-in insulation O.D
- Accommodates 500 kcmil size copper conductors
- Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
- Rated for 25/28 kV cables
- High-voltage, production-tested for partial discharge and AC ensure reliability
- Meets the requirements of IEEE 404 standards
3M™ 5525A Series Cold Shrink QS-III Splice Kit is an inline splice designed to join 25/28 kV tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables. The cold shrink design fits type MV-90/MV-105 cables with copper conductors while ensuring a quick installation and better cable size transitions. The kit is 15,000 amps-rated for faults current protection.
3M™ 5525A Series Cold Shrink QS-III Splice Kit includes an adapter tube, 2 compound tubes, six 2230 sealing strips, two 2228 tape rolls, 2 copper tape strips, 5 connectors, a CC-3 cleaning pad, shielding sleeve, ground strap, cable preparation template and an instruction booklet. It has a computer-aided design that provides a compact size and optimal distribution of the electrical field. The cold shrink splice body has a specially formulated silicone rubber construction to ensure good high and low temperature performance. Its jacketing with EPDM rubber construction provides physical protection. The kit meets the requirements of IEEE 404 standards.
Typical properties
Resources
Legal disclaimer
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
