3M™ Inline Splicing Kit 5741, 5 - 15 kV, Standard, 1/case
- Part Number 5741
- 3M ID 7000140701
- UPC 00054007494911
Details
Highlights
- Designed for use with 10000, 11000 and 20000 Series inline compression connectors
- The rubber mastic filler removes time-consuming penciling of cable insulation
- Perfect for splicing non-shielded, wet/dry solid dielectric power cables
- Rated for 5/8 kV applications
- RoHS 2011/65/EU Compliant
The 3M™ Cold Shrink Splicing Products are designed using the proprietary cold shrink delivery system developed by 3M.
The 3M™ Cold Shrink Splicing Products are designed using the proprietary cold shrink delivery system developed by 3M. Products are supplied prestretched on a removable core for efficiency and ease of installation. 3M™ Cold Shrink Splices 5740 Series are used for single conductor, non-shielded 5/8 kV cables. Each kit is a cold shrink design and contains enough material to insulate three splices. Connectors are not included and must be ordered separately. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation outside diamater.
Typical properties
Resources
Similar products
Current product  3M™ Inline Splicing Kit 5741, 5 - 15 kV, Standard, 1/case | ||||
|---|---|---|---|---|
| Conductor Sizes (Imperial) | 4 AWG | |||
| Insulation Outer Diameter (Metric) | 9.652 mm, 9.906 mm, 10.16 mm, 10.414 mm, 10.668 mm, 10.922 mm, 11.176 mm, 11.43 mm, 11.684 mm, 11.938 mm, 12.192 mm, 12.446 mm, 12.7 mm, 12.954 mm, 13.208 mm, 13.462 mm, 13.716 mm, 13.97 mm, 14.224 mm, 14.478 mm, 14.732 mm, 14.986 mm, 15.24 mm, 15.494 mm, 15.748 mm, 16.002 mm, 16.256 mm, 16.51 mm, 16.764 mm, 17.018 mm, 17.272 mm, 17.526 mm, 17.78 mm | |||
| Maximum Conductor Size (Imperial) | 4 AWG | |||
| Maximum Conductor Size (Metric) | 25 mm² | |||
| Minimum Conductor Size (Metric) | 10 mm² | |||
| Conductor Sizes (Metric) | 25 mm² |
3M™ Cold Shrink Shielded Splice Kits 5550 Series
3M™ Cold Shrink Quick Splice Kits QSLV-M Series
3M™ Cold Shrink Inline Splice Kits 5730 SeriesLegal disclaimer
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
