3M™ Versaflo™ Cleaning & Storage Kit TR-653/37373(AAD), for TR-600/800 PAPR

3M ID 7100035841, UPC 00051131373730, 3M Product Number TR-653

1 of 2

Hover to zoom

Enables TR-600 PAPR to be rinsed under running water.
Enables TR-600 to be submerged for cleaning.
Helps protect TR-600 from internal contamination during cleaning.
Helps protect TR-600 from internal contamination during storage.

View all details

For industrial/occupational use only. Not for consumer sale or use.

Specifications

Attribute Name	Value
Brand	Versaflo™
Case Quantity	1/pack
Compatible With	3M™ Versaflo™ TR-600 Series PAPR, 3M™ Versaflo™ TR-800 Series PAPR
Hazard Type	Silica
Product Series	TR-600
Product Type	Cleaning & Storage Kit
Recommended Application	Composite Finishing, Final Finish, Paint Preparation, Painting, Welding
Recommended Industry	Animal processing, Cosmetics, Design & Construction, Dry Foods, Facility Sanitation, Food Safety, General Manufacturing, Healthcare, Heavy Industrial, Heavy Infrastructure, Industrial Maintenance, Laboratories, Manufacturing, Nuclear Energy, Pesticide Application, Pharmaceutical, Pharmaceutical research and production, Recycling
Specifications Met	NIOSH Approved
TDS Required	No

Details

Enables TR-600 PAPR to be rinsed under running water.
Enables TR-600 to be submerged for cleaning.
Helps protect TR-600 from internal contamination during cleaning.
Helps protect TR-600 from internal contamination during storage.

The TR-653 Cleaning and Storage kit is designed to assist with product cleaning and storage. A plug and seal is provided for the inlet and outlet openings of the TR-600 series motor/blower. A cover is provided for the electrical connections of the TR-600 series battery.

The TR 653 kit is designed to assist with both product cleaning and storage. A plug and seal is provided for the inlet and outlet openings of the TR 600 series motor/blower. A cover is provided for the electrical connections of the TR 630 or TR 632 battery. Each kit contains: 1 inlet plug and 2 seals, 1 outlet plug and 2 seals, and 1 battery connector cover. The motor/blower plugs allow the motor/blower to be submerged, rinsed under running water, or machine washed as outlined in the User Instructions. The plugs may also help to keep the internal components of the motor/blower clean during storage. The plug seals should replaced after 30 uses or whenever found to be damaged or worn.

Resources

Brochures

Data Sheets

Industry\Technology Images

P&SA Matrices (PDF, 3.3MB)

Posters

70-0716-7142-7 Versaflo TR-600 Exploded View Poster (PDF, 709.5KB)

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.