Replacement flow indicator for 3M™ Adflo™ Powered Air Purifying Respirator (PAPR). Used for the pre-operational testing to ensure proper airflow as per the Adflo Instruction Manual.
Ensure your 3M™ Powered Air Respirator System is exceeding its minimum flow rate with 3M™Airflow Indicators. Our airflow indicators provide a simple and reliable way to test the airflow of your respirator system. The airflow of the unit must be checked before every use. If the air flow level is below the minimum flow rate, the respirator system should not be used until further examination and repair where necessary.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. If this product is being purchased for use in firefighting duties, please review this Notice Regarding Fluorinated Organic Compounds.