3M™ Cold Shrink QS4s Integrated Short Splice Kit 25SP Series
- | Select product options for IDs.
Details
Highlights
- Cold Shrink Design — for quick and easy installation; excellent for cable size transitions
- Complete Kit — includes the required products to make one splice
- Silicone Rubber Construction — for good high and low temperature performance
- Production Tested — partial discharge and A.C. withstand tests to provide reliability
- Computer Aided Design — for compact size and optimal distribution of electrical field
- Special Electrode Design — minimizes electrical stress at critical cable/splice interface
- Smooth Edge Neutral Extension Sock — virtually no frayed edges
- Integrated Ground — standard joint includes braid for easy connection to ground
The 3M™ Cold Shrink QS4s Integrated Short Splice Kit QS4s-25SP Series is a 25/28 kV-class inline splice for joining jacketed concentric neutral (JCN), flat strap, tape shield and longitudinally corrugated (LC) power cables.
The 3M™ Cold Shrink QS4s Integrated Short Splice Kit QS4s-25SP Series is a 25/28 kV-class inline splice for joining jacketed concentric neutral (JCN), flat strap, tape shield and longitudinally corrugated (LC) power cables. The cold shrink design is sized to fit Type MV-90 or Type MV-105 cables with copper or aluminum conductor sizes ranging from 1 AWG to 1000 kcmil (50 to 500 mm2). The cold shrink splice body is a one-piece molded design made of specially formulated silicone rubbers, while the jacketing is made of EPDM rubber for physical protection. Each splice manufactured is factory tested to provide reliability.
The splice can be used with 3M™ Shearbolt Connectors QCI Series, and can be used for size transitions within the listed kit size range. The 3M™ Cold Shrink QS4s Integrated Short Splice Kit QS4s-25SP Series meets or exceeds the 25/28 kV Voltage Class rating requirements of ANSI/IEEE Std. 404.
Applications
For splicing 25/28 kV shielded power cables:
- For inline splicing
- For feeder and distribution circuits
- For jacketed concentric neutral cables (JCN)
- For flat strap neutral cables
- For tape shielded cables
- For longitudinally corrugated (LC) shielded cables
- For copper or aluminum conductors
- For use with specified 3M™ Shearbolt Connectors QCI Series
- For size transition splicing
- For direct burial installations
- For submerged locations
Typical properties
Resources
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
