Attribute Name
|
Value
|
---|---|
Application
|
Cable Connection
|
Brand
|
3M™
|
Cable Shielding
|
Concentric Neutral (CN), Jacketed Concentric Neutral (JCN)
|
Conductor Material
|
Aluminum, Copper
|
Conductor Sizes (Imperial)
|
1/0 AWG, 1000 kcmil, 2 AWG, 2/0 AWG, 250 kcmil, 3/0 AWG, 350 kcmil, 4/0 AWG, 500 kcmil, 750 kcmil
|
Insulation Level
|
1.33, 100%, 133%
|
Insulation Outer Diameter (Imperial)
|
0.64 in, 0.65 in, 0.66 in, 0.67 in, 0.68 in, 0.69 in, 0.7 in, 0.71 in, 0.72 in, 0.73 in, 0.74 in, 0.75 in, 0.76 in, 0.77 in, 0.78 in, 0.79 in, 0.8 in, 0.81 in, 0.82 in, 0.83 in, 0.84 in, 0.85 in, 0.86 in, 0.87 in, 0.88 in, 0.89 in, 0.9 in, 0.91 in, 0.92 in, 0.93 in, 0.94 in, 0.95 in, 0.96 in, 0.97 in, 0.98 in, 0.99 in, 1 in, 1.01 in, 1.02 in, 1.03 in, 1.04 in, 1.05 in, 1.06 in, 1.07 in, 1.08 in, 1.09 in, 1.1 in, 1.11 in, 1.12 in, 1.13 in, 1.14 in, 1.15 in, 1.16 in, 1.17 in, 1.18 in, 1.19 in, 1.2 in, 1.21 in, 1.22 in, 1.23 in, 1.24 in, 1.25 in, 1.26 in, 1.27 in, 1.28 in, 1.29 in, 1.3 in, 1.31 in, 1.32 in, 1.33 in, 1.34 in, 1.35 in, 1.36 in, 1.37 in, 1.38 in, 1.39 in, 1.4 in, 1.41 in, 1.42 in, 1.43 in, 1.44 in, 1.45 in, 1.46 in, 1.47 in, 1.48 in, 1.49 in, 1.5 in, 1.51 in, 1.52 in, 1.53 in, 1.54 in, 1.55 in, 1.56 in, 1.57 in, 1.58 in, 1.59 in, 1.6 in, 1.61 in, 1.62 in, 1.63 in, 1.64 in, 1.65 in, 1.66 in, 1.67 in, 1.68 in, 1.69 in, 1.7 in
|
Material
|
EPDM Rubber
|
Maximum Conductor Size (Imperial)
|
1000 kcmil, 4/0 AWG
|
Maximum Conductor Size (Metric)
|
500 mm², 95 mm²
|
Minimum Conductor Size (Imperial)
|
2/0 AWG, 500 kcmil
|
Minimum Conductor Size (Metric)
|
240 mm², 35 mm²
|
Number of Conductors
|
1
|
Product Color
|
Black
|
Product Series
|
5415A, 5418A, 5610A
|
Splice Type
|
Cold Shrink
|
Voltage
|
15 kV
|
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splices 5456A-WG, 5457A-WG and 5458A-WG are inline splices for joining 25/28 kV jacketed concentric neutral (JCN) or concentric neutral (CN) power cables. It is a cold shrink design.
The cold shrink splice body is a one-piece molded design made of specially formulated silicone rubbers, while the jacketing is made of EPDM rubber for its special physical properties. Each splice is high-voltage production tested to ensure reliability. Kits can be ordered with connectors packed in the kit or the kit and connector can be ordered as separate items. Meets requirements of IEEE 404. Each kit makes one splice. Note: 5456A-WG, 5457A-WG and 5458A-WG are partially jacketed splices containing built-in bleeder wires. Additional end user materials are required to convert to full jacketing. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.