1. United States
  2. All 3M Products
  3. Electronics Materials & Components
  4. Electronics Films & Tapes
  5. Conductive Adhesive Transfer Tapes
  6. 3M™ Electrically Conductive Single-Sided Tape CEF-3BV, 1240 mm x 50 m, 1 Roll/Case

3M™ Electrically Conductive Single-Sided Tape CEF-3BV, 1240 mm x 50 m, 1 Roll/Case

  • 3M Product Number CEF-3BV
  • 3M ID 7010593165
  • UPC 06912504267312

Good Z-axis conductivity

High adhesion

Excellent conformability and quick bonding

View more details
Frequently viewed resources
Tech Data Sheet (PDF, 169KB)

Details

Highlights
  • Good Z-axis conductivity
  • High adhesion
  • Excellent conformability and quick bonding
  • Good handling and workability
  • Copper/nickel-plated fabric enables EMI/EMC shielding performance
  • Halogen free*
  • RoHS compliant**
  • Scratch-resistant foil

3M™ Electrically Conductive Single-Sided Tape CEF-3BV is a conductive fabric tape that offers excellent grounding performance between substrates and high EMI shielding performance (typically greater than 60 dB at specific frequencies). This single-sided fabric tape consists of a copper/nickel-coated conductive polyester fabric and an acrylic-based electrically conductive pressure sensitive adhesive (CPSA). It offers excellent handling characteristics, is thin in overall construction and allows for easy rework.

  • Icon of parallel lines flexing vertically representing conformability.
    Conformability
  • Icon of a chip on a shield representing high shielding effectiveness.
    High Shielding Effectiveness
  • Icon of a substrate wrapping a component representing LCM wrapping performance
    LCM Wrapping Performance
  • Icon of an eye representing sleek appearance.
    Sleek Appearance

Product construction
Cross-section of product construction listing the three layers of conductive fabric carrier, conductive adhesive, and the release liner

  • Cross-section of appropriate product usage with the conductive tape bridging a conductive substrate and chassis for grounding.
  • Product usage

    3M™ Electrically Conductive Single-Sided Tape CEF-3BV delivers a broad spectrum of performance across EMI shielding and passive intermodulation (PIM) management applications.
     

    • Display wraps
    • Sensors
    • EMI shields
    • Display chip on flex
Pair of icons representing recommended product applications of Electrostatic Discharge (ESD) and EMI Shielding.

Typical properties

Resources

Connect with us. We’re here to help.

Need help finding the right product for your project? Contact us if you need product, technical or application advice or want to collaborate with a 3M technical specialist
  • All fields are required unless indicated optional

  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers. Please be aware that this information may be stored on a server located in the U.S. If you do not consent to this use of your personal information, please do not use this system.

  • Submit

Our apologies...

An error has occurred while submitting. Please try again later...

Thank you!

Your form was submitted successfully

The technical information and data shown on this page should be considered representative or typical only and should not be used for specification purposes. 3M products shown on this website may not be available in all geographic regions or may not be available at this time. Please contact your local sales representative to determine product availability. *Halogen Free is defined as having maximum 900 ppm bromine, maximum 900 ppm chlorine, and maximum 1500 ppm total bromine and chlorine, per IEC 61249-2-21. *Halogen free is defined as having maximum 900 ppm bromine, maximum 900 ppm chlorine, and maximum 1500 ppm total bromine and chlorine, per IEC 61249-2-21. **EU RoHS This product does not exceed the maximum concentration values (MCVs) set under EU Directive 2011/65/EU (RoHS recast/RoHS 2), as stated in Annex II to that directive. This means that each of the homogenous materials within this product does not exceed the following MCVs: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; and (b) 0.01% (by weight) for cadmium.