3M™ Scotch-Weld™ Epoxy Adhesive DP100LH

  • 3M Product Number DP100LH
  • 3M ID B5005065035

2-4 minute worklife

High shear and peel strength

Low Halogen

View more details
Frequently viewed resources
Tech Data Sheet (PDF, 85KB)

Details

Highlights
  • 2-4 minute worklife
  • High shear and peel strength
  • Low Halogen
  • Low Viscosity

3M™ Scotch-Weld™ Epoxy Adhesive DP100 Plus LH Clear is a fast setting, two-part, 1:1 mix ratio mercaptan-cured epoxy adhesive. It is unique among fast setting mercaptan cure epoxies in that it combines high shear strength with good peel performance properties. Scotch-Weld DP100 Plus LH Clear is transparent and slightly flexible when cured.

Typical properties

Resources

Ask a 3M Expert

Ask a 3M Expert

Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.