3M™ Industrial Loadbreak Elbows 5811 Series

1 of 1

Hover to zoom

Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
Locking ring ensures secure connection
Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
High-quality, peroxide-cured EPDM provides better insulation

View all details

For industrial/occupational use only. Not for consumer sale or use.

Specifications

Attribute Name	Value
Brand	3M™
Cable Type	Compact/Solid, Stranded
Cable Voltage Rating	25 kV
Component Type	Elbow
Conductor Sizes (Imperial)	1 AWG, 2 AWG, 2/0 AWG, 250 kcmil, 3/0 AWG
Current Rating	200 A
Family	3M™ 200 Amp 25 kV Industrial Loadbreak Elbow
Includes Compression Connector	No, Yes
Insulation Diameter Range	0.700-0.910 in, 0.850-1.100 in, 1.040-1.250 in
Insulation Diameter Range (Metric)	17.8-23.1 mm, 21.6-27.9 mm, 26.4-31.8 mm
Insulation Level	100%, 133%
Insulation Outside Diameter Range	0.7 to 0.91 in, 0.85 to 1.1 in, 1.04 to 1.25 in
Maximum Insulation Outer Diameter (Imperial)	0.91 in, 1.1 in, 1.25 in
Maximum Insulation Outer Diameter (Metric)	23 mm, 28 mm, 32 mm
Maximum Operating Voltage	25 kV
PlantAnalystID	ABBA-Z1GUQ
Product Series	5811
Product Type	Accessory
RoHS 2011/65/EU Compliant	Undetermined
RoHS EU Comments	Contact 3M for information
Separable Connector Type	Load Break Elbows
Units per Case	1

Details

Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
Locking ring ensures secure connection
Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
High-quality, peroxide-cured EPDM provides better insulation
Meets ANSI/IEEE Standard 386.

3M™ 5811 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated plug in termination. This kit is ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.

3M™ 5811 Series Industrial Loadbreak Elbow Kit includes an elbow body, loadbreak probe, probe installation tool, silicone lubricant, cold shrink jacketing tube, mastic strips, ground braid assembly, constant force spring, 3M Cable Cleaning Pads CC 3 and installation instructions. This kit is rated for 25 kV and 200 amp applications. The copper top compression connector transitions from the cable to the loadbreak probe. The aluminum barrel of the elbow makes the connector easy to crimp on both aluminum and copper conductors. The copper lug ensures a reliable, tight, cool operating connection with the loadbreak probe. Meets ANSI/IEEE Standard 386.

Resources

Catalogs

3M™ Separable Connectors, 2013 Electrical Products Catalog (PDF, 1.9MB)

Data Sheets

5811 Series Indust. Loadbreak Elbow (PDF, 76.4KB)

Instructions

5811 Industrial Loadbreak Elbow (PDF, 296.0KB)

Regulatory Material

EMD Shelf Life Statement (PDF, 90.3KB)

Safety Data Sheets

5811 Series 200 Amp Industrial Loadbreak Elbows (w/C-Si Grease) (PDF)

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.