Scotch® Fine Line Masking Tape 2800

  • Options available
  • | Select product options for IDs.

SPECIALIZED DESIGN: Fine line paint masking made specifically for thermoplastic olefin (TPO) surfaces

HEAT RESISTANT: Formulated for bake cycles up to 300 °F (149 °C) for 30 minutes

CRISP LINE SEPARATION: Creates sharp lines without tracking, bleeding, or ghosting

View more details
Frequently viewed resources
Tech Data Sheet (PDF, 84KB)

Details

Highlights
  • SPECIALIZED DESIGN: Fine line paint masking made specifically for thermoplastic olefin (TPO) surfaces
  • HEAT RESISTANT: Formulated for bake cycles up to 300 °F (149 °C) for 30 minutes
  • CRISP LINE SEPARATION: Creates sharp lines without tracking, bleeding, or ghosting
  • TRANSLUCENT BACKING: It's see-through, blue vinyl backing assists placement and identification
  • CLEAN REMOVAL: Peels off of surfaces without leaving residue

Scotch® Fine Line Masking Tape 2800 is designed especially for masking thermoplastic olefin (TPO) surfaces and for bake cycles that reach up to 300°F (148°C) for 30 minutes. It is compatible with most industrial paints and painting processes and removes cleanly for up to 7 days outdoors with no residue, tracking or bleeding.

Image of a worker removing masking tape and showing a clean paint line forming a curve
Scotch® Fine Line Masking Tape 2800 provides sharp lines and clean removal with no residue or bleeding
Masking performance that can take the heat
Scotch® Fine Line Masking Tape 2800 provides sharp lines and clean removal with no residue, tracking or bleeding, and it resists ghosting. It is designed for fine line paint masking on thermoplastic olefin (TPO) surfaces as well as on metals and other materials, and to handle bake cycles up to 300°F (148°C) for 30 minutes. This tape has a translucent backing that assists in placement and allows visual confirmation that the adhesive is wetted out on the surface. It removes cleanly for up to 7 days outdoors.

Recommended Applications
  • Automobile and truck painting
  • Marine painting
  • Bus and rail car painting

Bringing Better Ideas to the Surface Through Science and Innovation
The 3M Closure and Masking Systems Division applies the science of adhesion to deliver innovative solutions that improve the shipping and manufacturing processes of companies around the world. In the end, these technologies help customers deliver competitive products to the market faster and more efficiently.

Typical properties

Resources

Ask a 3M Expert

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.