1. United States
  2. All 3M Products
  3. Abrasives
  4. Abrasive Sheets & Rolls
  5. Film Sheets & Rolls
  6. 3M™ Diamond Microfinishing PSA Film Sheet 675L

3M™ Diamond Microfinishing PSA Film Sheet 675L

  • Options available
  • | Select product options for IDs.

Micron-graded diamond mineral delivers a wide range of surface finishes and stock removal for all customer requirements

Polyester film backing allows film to be used dry or wet with coolant

An exceptional product for thermal spray finishing of contour / complex shapes

View more details
Frequently viewed resources
Safety Data Sheet (PDF, 0B)

Details

Highlights
  • Micron-graded diamond mineral delivers a wide range of surface finishes and stock removal for all customer requirements
  • Polyester film backing allows film to be used dry or wet with coolant
  • An exceptional product for thermal spray finishing of contour / complex shapes
  • Pressure sensitive adhesive allows for easy attachment and clean removal
  • Color coded to reduce the risk of error and mixing up abrasive grades

Designed with a polyester film backing and diamond mineral, the 3M™ Diamond Microfinishing PSA Film Sheet 675L delivers a range of finishes on hard materials like thermal spray coating, ceramics, carbides, chilled iron and granite.

3M™ Diamond Microfinishing PSA Film Sheet 675L
Compared to stones, 675L film can cut superfinishing time in half or more
High-quality Materials for Micro-finishing
3M™ Diamond Microfinishing PSA Film Sheet 675L securely anchors micron-graded diamonds to a polyester film backing. Known for its durability, the polyester film backing assists in product flexibility and life. The sheets are also color coded by grade to help you reduce the risk of selecting the wrong grade.

Waterproof Backing and Easy Attachment
Polyester film backings are water resistant, so the abrasive may be run with a lubricant, which helps remove swarf and debris. This film also uses pressure sensitive adhesive, which allows for easy attachment, and can be removed without leaving any sticky residue.

Tips for Achieving Desired Roughness Average
Many micro-finished products require a specific Ra, or roughness average. To obtain the desired Ra when applying thermal spray coatings, we recommend following a unique sequence of steps tailored to the substrate. It is important for operators to consider these factors — Ra and substrate — when selecting the grade of film for this sheet.

Learn More about Microfinishing and 3M Superabrasives (PDF, 1.95 Mb)

3M Microfinishing Films

Product Mineral Backing Caliper
(0.001")
Backside Grades (Microns)
9 15 20 30 40 45 50 60 74 80 100 125
372L Aluminum
Oxide
5 Type S      
372L Type 2*
(colored)
Aluminum
Oxide
5 Type S          
373L Aluminum
Oxide
5 Type Q      
373L Type 2*
(colored)
Aluminum
Oxide
5 Type Q          
382L Type 2
(colored)
Aluminum
Oxide
6 Type S              
362L Aluminum
Oxide
3 Type S          
272L** Aluminum
Oxide
5 Type S      
472L Silicon
Carbide
5 Type S              
675L Diamond 5 Type S                
Diamond 6 Type S                    

*Suggest to specify the 372L or 373L type 2 (colored) film whenever possible to assist with Error-proofing.
**European Lead Product. Plus wide rolls and belts globally.

Typical properties

Resources

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.