3M™ Platinum™ Plus is a lightweight body filler which offers excellent adhesion to properly-prepared steel, galvanized steel, aluminum, E-coat, sheet molded compound (SMC) and fiberglass reinforced polyester (FRP) substrates. 3M™ Platinum™ Plus is formulated with a stain-free/tack free resin.
This two-component filler is used to repair dents, dings, gouges and other cosmetic imperfections. 3M Platinum™ filler repairs these blemishes with the added convenience of being stain-free and tack-free. Fast curing properties allow for sanding in approximately 15 to 20 minutes.
3M™ Platinum™ Plus body filler are formulated with an adhesion promoter which allows them to adhere to almost any surface. The filler actually “bites” into properly-prepared galvanized steel, E-coat, metal, aluminum, fiberglass, SMC, cured epoxy, urethane and lacquer primers.
3M™ Platinum™ Plus body filler is available in traditional cans and packaged for the 3M™ Dynamic Mixing System.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.