- A high performance low viscosity two component urethane adhesive
- Adhesive is used to saturate fiberglass cloth when preparing backup patches
- Secondary use includes filling cracks, channels and areas restricting the application of an adhesive bead
- Use with 3M™ Performance Manual Applicator, PN 08284 and 3M™ Static Mixing Nozzle, PN 08193
More...
View all details
For industrial/occupational use only. Not for consumer sale or use.
Attribute Name
|
Value
|
Adhesive Type
|
Two-Part Urethane
|
Alternative Sale Availability
|
2. This item can be sold to consumers and industrial and there are no VOC restrictions.
|
Brand
|
3M™
|
Case Quantity
|
6 Bags per Case
|
Color Family
|
Green
|
Consistency
|
Paste
|
Container Size (Imperial)
|
13.52 fl oz (US)
|
Container Size (Metric)
|
400 ml
|
Container Type
|
Cartridge
|
Cure Time
|
24 hr
|
Number per Inner
|
1 per bag
|
Product Color
|
Green
|
TDS Required
|
No
|
Volume (Imperial)
|
13.5 fl oz
|
Volume (Metric)
|
400 mL
|
Work Time
|
10 Minutes
|
- A high performance low viscosity two component urethane adhesive
- Adhesive is used to saturate fiberglass cloth when preparing backup patches
- Secondary use includes filling cracks, channels and areas restricting the application of an adhesive bead
- Use with 3M™ Performance Manual Applicator, PN 08284 and 3M™ Static Mixing Nozzle, PN 08193
3M™ Fiberglass Matting Adhesive is a low viscosity two-part urethane used to saturate fiberglass cloth or mat when preparing backup patches. Our adhesive may also be used for filling cracks, channels and areas restricting the application of an adhesive bead.
Due to its excellent absorption into fiberglass mat or cloth, 3M™ Fiberglass Matting Adhesive is used to saturate fiberglass cloth and/or mat when creating backup patches for Sheet Molded Compound (SMC) and Fiber Reinforced Polyester (FRP). Examples of FRP include Fiberglass and Metton® panels. If bonding reinforcement patches to flexible plastics or Metton® use 3M™ Polyolefin Adhesion Promoter, part number 05907 before applying the patch.
Typical Performance Properties
The following times have been determined with ambient air temperature and substrate temperature at 73°F (23°C) and are considered typical values. Our fiberglass matting adhesive has a mix nozzle dwell time of 9.5 minutes, work time of 10 minutes, sanding time of 45 minutes and cure time of 45 minutes.
Bringing Science to the Art of Auto Body Repair
3M is well known among collision repair professionals and others who are committed to helping you restore the beauty and value to your cars and boats. 3M™ Fiberglass Matting Adhesive is another way that 3M applies science to life — and helps you rediscover the excitement of the vehicles you own.
See Also:
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.