Our 3M™ Panel Bonding Adhesive is a cost-effective two-part epoxy adhesive for bonding replacement body panels. From its fast, convenient cartridge system the adhesive seals and bonds steel, aluminum, SMC, and FRP securely in a single operation.
The result of years of development and testing, our 3M™ Panel Bonding Adhesive bonds and seals plastic and metal substrates including cold roll steel, aluminum, SMC, and FRP (traditional fiberglass). It is ideal for bonding quarter panels, roofs skins, box sides, van sides, utility vehicle sides and door skins — anywhere that requires a lasting bond for outer body panels - as specified by OEM. Many interior or other adjacent parts that must be removed to avoid damage from welding can remain installed when bonding.
Note: Panel Bonding Adhesive should only be used to bond structural components such as pillars, rockers or frame members when specified by an OEM (Example: Aluminum Ford F-150). Unless specified by an OEM, structural components should be welded.
See Standard Operating Procedures for Aluminum Body Repair (PDF, 3.09 Mb)
Two-part panel bonding adhesive is available from 3M in cartridges from 50 mL to 400 mL, and works seamlessly with 3M manual applicator guns such as 08117 and the 3M pneumatic applicator gun 09930 for the 200ml cartridges. It applies quickly from the cartridge with no pre-mixing or measuring. The adhesive contains glass beads which reduces excessive squeeze-out and makes it easy to form consistent bondlines. A work time of up to two hours and the added heat-assisted on-demand curing allows for accurate application, squeeze-out sealing and cleanup. The bonding adhesive also has an excellent shelf life even after it's been opened, reducing the cost of replacing unused product.
Better Science for Better Bonding from 3M
3M™ Panel Bonding Adhesive is the result of years of laboratory development and field testing. Our scientists pioneered "bondline control" in the collision repair market, incorporating glass beads into our adhesive formula that work as built-in spacers for optimal bond line thicknesses. Our adhesive cartridges, together with our manual and pneumatic applicator guns and mixing nozzles, form a system that eliminates pre-mixing or measuring of two-part epoxies. The ability to bond effectively results in a more versatile, cost-effective shop.
Learn More about 3M™ Panel Bonding Adhesive (PDF, 5.85 Mb)
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.