Scotch-Brite™ Cut and Polish Disc D5
- | Select product options for IDs.
Details
Highlights
- 5-disc design conforms well for irregular surfaces as well as in grates and tracks
- Durable Non-woven material and medium grade abrasive provide uniform cut-and-polish results
- Conformable and flexible disc gets into hard-to-reach areas
- 1/4" shaft is suitable for use on power tools, die grinders, or inline sanders
- Provides high cut-rate and low heat retention, allowing extended contact with the workpiece
Scotch-Brite™ Cut and Polish Disc D5 is five discs of strong, durable cut and polish web on a 1/4" shank that provides coverage on larger areas, irregular/contoured surfaces, bar grates, louvers, vents, and tracks. The Cut and Polish Disc is engineered to produce satin or high-luster finishes, cleaning, or light deburring on a variety of metals.
Our Scotch-Brite™ Cut and Polish Disc D5 uses a durable, non-woven, open-web construction is load resistant, runs cool, and provides conformability while the aluminum oxide abrasives work to deliver consistent cutting action. The 1/4" shank is suitable for power tools with a 1/4" drive, die grinders, and inline sanders.
We chose aluminum oxide abrasive, which is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
Our Scotch-Brite™ industrial abrasives are a unique surface conditioning product with abrasives incorporated into non-woven nylon or other synthetic fibers. Combining abrasives into the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
Learn more about 3M™ Industrial Products for Metalworking.
Typical properties
Resources
Reviews
Large Volume Order
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
