Scotch-Brite™ Molding Adhesive and Stripe Removal Disc
- | Select product options for IDs.
Details
Highlights
- Made with a strong and durable polymer that can withstand repeated friction for effective removal of unwanted decals, pin striping, graphics, tapes, films
- May be used on non-heat sensitive substrates such as many gel coats, acrylic and urethane paints
- Attaches to portable hand tools or slow speed grinders (MOS <4000 RPM)
- Available in 4" and 6" diameters
The Scotch-Brite™ Molding Adhesive and Stripe Removal Disc is manufactured to effectively remove unwanted details such as vinyl stripes, numbers, letters and graphics from a variety of surfaces without the need to heat prep or use chemical solutions.
Used to remove vinyl stripes, numbers, letters and graphics
Remove Unwanted Details
Vinyl decals, graphics, striping, VHB Tapes — when the value or relevance of these visuals retires, these once-prized details may present users with a new challenge. Scotch-Brite™ Molding Adhesive and Stripe Removal Disc was designed to help you remove unwanted details with efficiency and ease.
Ease of Use
Scotch-Brite™ Molding Adhesive and Stripe Removal Disc is a solid, molded rubber wheel that can efficiently remove unwanted vinyl stripes, numbers, letters and graphics — wearing adhesive moldings and stripes away by way of friction. The disc creates friction and heat as it spins in order to cleanly remove adhesives and stripes. Subsequently, prep work with heat tools — like blow dryers, heat lamps and guns — is no longer needed, helping to increase productivity and speed the removal process. Now, you can easily remove details without having to prep the workpiece with heat tools or messy spray and gel compounds.
Long lasting, flexible, circular disc form
The disc will not gouge, mar or dent non-heat-sensitive surfaces that lie beneath the decals, which is why it is often used on non-heat-sensitive gel coats, acrylic enamels and urethane paints. MOS for this disc is ≤4000 RPM, allowing it to be used with various tools, including slow speed grinders or portable drills. Scotch-Brite™ Molding Adhesive and Stripe Removal Disc is roughly an inch thick and — as a solid molded product — is dense, durable and long lasting. The narrow width lends itself to removing small straight lines, such as pin stripping.
Altogether, the Scotch-Brite™ Molding Adhesive and Stripe Removal Disc helps reduce prep time, messy compounds and operator fatigue; the labor-intensive process of removing unwanted details becomes easier and more efficient.
Typical properties
Resources
Reviews
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
