Scotch-Brite™ Clean and Strip XT Pro Disc features silicon carbide abrasive mineral incorporated into an open nylon web. It effectively removes rust, paint, mill scale, coatings and adhesives from surfaces without significantly altering the base material. The high-strength fibers are highly conformable, resist chunking and loading, and perform well on the edges of a workpiece.
Take Advantage of High Conformability
With its reengineered fiber, the Scotch-Brite™ Clean and Strip XT Pro Disc allows operators to take advantage of all the benefits that come with increased conformability without compromising strength. With increased conformability, this disc achieves a larger contact area with the workpiece for faster removal rates. It also conforms to weld bead ripples to polish welds without removing them, and works in hard-to-reach areas without damaging the substrate.
In addition to its high conformability, the Scotch-Brite™ Clean and Strip XT Pro Disc offers low vibration, decreased chunking, low spark, a high speed rating and long life. That all adds up to a disc you can spin onto your angle grinder with confidence.
Spongy Web, Sharp Mineral
To engineer our Scotch-Brite™ Clean and Strip XT Pro Disc, silicon carbide mineral is combined with non-woven nylon fibers using resin. Silicon carbide is a very sharp synthetic mineral commonly used in low-pressure applications like paint prep. The resin bond strengthens the disc and gradually breaks down to reveal new fibers and sharp mineral – delivering a consistent cut over the life of the abrasive.
The combination of fiber strands, resin and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, minimizing loading of the abrasive.
Safety Data Sheets
(PDF , 0B)
(PDF , 56MB)
(PDF , 1MB)
(PDF , 14MB)
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.