United States
All 3M Products
Building Materials
Fire Protection
Fire, Water, Smoke & Sound Tapes
3M™ Fire and Water Barrier Tape FWBT2, Translucent, 2 in x 75 ft, 24 Each/Case

3M™ Fire and Water Barrier Tape FWBT2, Translucent, 2 in x 75 ft, 24 Each/Case

Part Number FWBT2
3M Product Number FWBT2
3M ID 7010401346
UPC 00076308982331

Overall Width (Metric)	5.08 cm
Overall Width (Imperial)	2 in
Overall Length (Metric)	22.86 m
Overall Length (Imperial)	75 ft

Provides fire, water and smoke protection in construction and perimeter joints

Works as acoustic barrier by minimizing noise transfer

Broad temperature range when applying

View more details

Details

Highlights

Provides fire, water and smoke protection in construction and perimeter joints
Works as acoustic barrier by minimizing noise transfer
Broad temperature range when applying
High tack adhesive sticks to many common building materials
Acts as an immediate barrier to water leakage

3M™ Fire and Water Barrier Tape is an elastomeric fire, water, smoke and sound tape. When installed properly it can act as a barrier to water leakage and airborne sound transmission, while helping to control the transmission of fire, heat and smoke.

3M™ Fire and Water Barrier Tape cut to length to cover a pipe hole

Seals and protects in two simple steps—select the type, size and amount of tape appropriate for your application

3M™ Fire and Water Barrier Tape can provide up to 4-hours of fire protection in construction joints per ASTM E 1966 (UL 2079), 3-hour fire protection in perimeter joints per ASTM E 2307 and 2-hour fire protection in through-penetration applications per ASTM E 814 (UL 1479).

Applications

Fire protection in construction and perimeter joints
Fire protection in through-penetration applications
Acoustic barrier
Barrier to water leakage

Removing liner of 3M™ Fire and Water Barrier Tape over through-penetration point

Lay tape in place, then peel off release liner and adhere tape to surface

This elastic material maintains performance with up to +/- 50% movement capabilities. It has a high tack adhesive that sticks to most common building materials and exceeds the AAMA 711 minimum for adhesion in peel. In addition, it can be installed in temperatures as low as 0°F (18°C) and as high as 120°F (49°C). Adding to its versatility is a unique adhesive that bonds to damp surfaces. This product acts as an acoustic barrier by minimizing noise transfer (STC-Rating of 54 when tested in a STC 54-rated wall assembly), meets the intent of LEED® VOC environmental guidelines and also acts as an immediate barrier to water leakage passing the ASTM D 6904 rain resistance test. Our 3M™ Fire and Water Barrier Tape complies with the current requirements of the International Building Code (IBC). NFPA 5000 and NFPA 101.

Learn More about 3M Fire Protection Products (PDF, 568.5 Kb)

Typical properties

Details

Resources

Reviews

Ask a 3M Expert

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.