1. United States
  2. All 3M Products
  3. Electrical
  4. Splices & Accessories
  5. Molded Rubber Splices
  6. 3M™ QS-II Molded Rubber 5451-CI-21-840, CN and JCN Cable, 25/28 kV, 2 or 1 AWG, 0.83-1.04 in, 1/case

3M™ QS-II Molded Rubber 5451-CI-21-840, CN and JCN Cable, 25/28 kV, 2 or 1 AWG, 0.83-1.04 in, 1/case

  • Part Number 5451-CI-21-840
  • 3M ID 7100164250
  • UPC 00054007091547

Jacketing kit is required for JCN cable

Meets the requirements of IEEE 404 standards for cable joints

Computer design ensures a compact size and optimal distribution of the electrical field

View more details
Frequently viewed resources
Tech Data Sheet (PDF, 172KB)Safety Data Sheet (PDF, 0B)
Conductor Sizes (Imperial) 1 AWG, 2 AWG
Insulation Outer Diameter (Metric) 23.114 mm, 23.368 mm, 22.352 mm, 22.606 mm, 22.86 mm, 26.416 mm, 21.082 mm, 21.336 mm, 21.59 mm, 21.844 mm, 22.098 mm, 23.622 mm, 23.876 mm, 24.13 mm, 24.384 mm, 24.638 mm, 24.892 mm, 25.146 mm, 25.4 mm, 25.654 mm, 25.908 mm, 26.162 mm
Cable Shielding Concentric Neutral (CN), Jacketed Concentric Neutral (JCN)
Insulation Outer Diameter (Imperial) 0.87 in, 0.88 in, 0.89 in, 0.91 in, 0.92 in, 0.83 in, 1 in, 0.84 in, 0.85 in, 0.86 in, 0.93 in, 0.94 in, 0.95 in, 0.96 in, 0.97 in, 0.98 in, 0.99 in, 0.9 in, 1.01 in, 1.02 in, 1.03 in, 1.04 in
Product Type Inline

Details

Highlights
  • Jacketing kit is required for JCN cable
  • Meets the requirements of IEEE 404 standards for cable joints
  • Computer design ensures a compact size and optimal distribution of the electrical field
  • Designed for direct burial installations, aerial installations and submerged locations
  • Peroxide-cured EPDM rubber construction offers long term elastic memory

The 3M™ Molded Rubber QS-II Inline CN/JCN Cable Splice Kits 5450 Series kits are one-piece inline splices designed for use on 25/28 kV CN and JCNcable. Meets requirements of IEEE 404 for cable joints. The splice is a one-piece molded design made of specially formulated, peroxide cured EPDM rubbers. Each splice is production tested on CN cable to ensure reliability. Each kit makes one splice. Jacketing kit is needed for JCN cable. Connectors, unless specfied, are not included in the kit, and must be ordered separately. Refer to the index to find CI, CI-840 and CI-A series connectors. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Typical properties

Resources

Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.