3M™ Wraparound Heat Shrink Cable Repair Sleeve HDCW-35/10-500, Length 19.7 in (500 mm), 5/case

Part Number HDCW-35/10-500, 3M ID 7010403591, UPC 34001895590536

1 of 1

Hover to zoom

Excellent protection against mechanical stress
Offers excellent corrosion protection on undamaged cables
Rated for 35 kV applications
Made of adhesive-lined, cross-linked polyolefin

View all details

For industrial/occupational use only. Not for consumer sale or use.

Specifications

Attribute Name	Value
Brand	3M™
Conductor Sizes (Imperial)	1 AWG, 1/0 AWG, 2 AWG, 2/0 AWG, 4 AWG, 6 AWG, 8 AWG
Expanded Sleeve Diameter	1.69 in
Family	3M™ Heat Shrink Wraparound Cable Repair Wrap Sleeve HDCW
Heat Shrink Type	Heat Shrink Molded Shapes, Heavy-Duty Heat Shrink Tubing
Inner Diameter After Shrink (Imperial)	0.3 in
Inner Diameter After Shrink (Metric)	8 mm
Inner Diameter Before Shrink (Imperial)	1.97 in
Inner Diameter Before Shrink (Metric)	50 mm
Jacket Repair Range	0.39 to 1.38 Inch
Material	Adhesive-lined, Cross-Linked Polyolefin
Minimum Expanded Tubing I. D.	1.69 in
Overall Length (Imperial)	19.7 in
Overall Length (Metric)	500 mm
Product Type	Splice
Recovered Sleeve Diameter	0.32 in
Sleeve Length	19.7 in
Splice Configuration	Heat Shrink Cable Repair Wrap Sleeve (HDCW)
Splice Type	Heat Shrink
Units per Case	5
Voltage	1 kV, 15 kV, 25/28 kV, 35 kV, 8 kV

Details

Excellent protection against mechanical stress
Offers excellent corrosion protection on undamaged cables
Rated for 35 kV applications
Made of adhesive-lined, cross-linked polyolefin
Thick-walled sheet is tough and reliable
ANSI Certified and RoHS 2011/65/EU Compliant

3M™ Heat Shrink Cable Repair Sleeve HDCW is designed to repair quickly damaged cable jacketing. This wraparound sleeve can be used as insulation material on cable and splices up to 1000V and as jacket repair material on cable up to 35 kV. The cross linked polyolefin construction has an adhesive that offers moisture seal protection.

3M™ Heat Shrink Cable Repair Sleeve HDCW offers excellent protection against mechanical stress. This wraparound sleeve with hot melt adhesive, forms a durable, moisture resistant seal. The cross linked polyolefin construction offers reliable performance in harsh environmental conditions. The wrap sleeve design allows it to be installed in tight spaces with ordinary heating. ANSI C119.1 Requirement and RoHS Compliant.

Resources

Brochures

3M HDCW Wraparound Heat Shrink Cable Repair Sleeves (PDF, 306.4KB)

Catalogs

3M™ Heat Shrink, 2013 Electrical Products Catalog (PDF, 7.8MB)

Regulatory Material

EMD Shelf Life Statement (PDF, 90.3KB)

Safety Data Sheets

Cleaning Cloth Soaked with Isopropyl Alcohol (PDF)

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.