1. United States
  2. All 3M Products
  3. Electrical
  4. Wire & Cable
  5. Tubing & Molded Parts
  6. Cable Sleeves
  7. 3M™ Rejacketing Sleeve RJS-2, 10 ft coil, 1 /Case

3M™ Rejacketing Sleeve RJS-2, 10 ft coil, 1 /Case

Part Number RJS-2-10FT3M ID 7100005779UPC 00054007431015
  • Offers good resistance to moisture, corrosion, ozone and UV rays
  • Secures the phase legs of medium-voltage and 3/C shielded power cables
  • Designed for use on tape shield, wire shield, armored and non-armored power cables
  • Comes in dark gray color
 More...
View all details
View Legal Disclaimer
For industrial/occupational use only. Not for consumer sale or use.
Specifications
Attribute Name
Value
Brand
3M™
Breakout Boot
No
Cable Accessory Products
Cable Breakout Boot Kits
Color Family
Gray
Dielectric Strength (V/mil)
428 V/mil
Elongation
910 %
Inner Diameter After Shrink (Imperial)
0.6 in
Inner Diameter After Shrink (Metric)
15.2 mm
Inner Diameter Before Shrink (Imperial)
0.8 in
Inner Diameter Before Shrink (Metric)
20.3 mm
Insulation Rejacketing
Yes
Manufacturing Origin
USA
Metallic Shield Diameter Range
0.60 - 0.80 in
Metallic Shield Diameter Range (Metric)
15.2-20.3 mm
Operating Temperature (Celsius)
105
Operating Temperature (Fahrenheit)
221 Degree Fahrenheit
Overall Length (Imperial)
10 ft
Overall Length (Metric)
3048 mm
Product Color
Dark Gray
Product Type
Splice Jacketing and Rejacketing Kits
Temperature Rating
356°F (180°C) Class H
Tensile Strength (Imperial)
1058 Pound-Force Per Square Inch
Units per Case
1
Voltage Range
3.3 - 15 kV
Details
  • Offers good resistance to moisture, corrosion, ozone and UV rays
  • Secures the phase legs of medium-voltage and 3/C shielded power cables
  • Designed for use on tape shield, wire shield, armored and non-armored power cables
  • Comes in dark gray color
  • Silicone rubber insulator on inner-expandable polyester braid minimizes sliding friction and ensures a leak-proof seal
  • Voltages of up to 35 kV or less

3M™ Rejacketing Sleeve provides reliable safety and protection to the phase legs of 3/C shielded, medium voltage power cables from termination operating environments. Incorporated with a silicone rubber insulator and polyester braid, this sleeve is resistant to UV rays, ozone, corrosion and moisture. It is designed for use with 3M Cold Shrink QT II and QT III, Silicone Rubber Terminations.

3M™ Rejacketing Sleeve works in combination with cold shrink breakout boots and silicone rubber terminations. It is ideal for tape shield, wire shield, armored and non armored power cables. The rejacketing sleeves are designed to protect the phase legs from exosure to: moisture, corrosion, ozone, ultra violet radiation and other hazards associated with termination operating environments. Easy to adjust length, the sleeve conforms to varied equipment connections and mounting requirements.

Legal Disclaimer

Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.