1. United States
  2. All 3M Products
  3. Electrical
  4. Splices & Accessories
  5. Motor Lead Splices
  6. 3M™ Motor Lead Pigtail or V-Stub Splice 5382, 5-8 kV, Feeder: 2-1/0 AWG, Motor Lead: 4-1/0 AWG , 1/Case

3M™ Motor Lead Pigtail or V-Stub Splice 5382, 5-8 kV, Feeder: 2-1/0 AWG, Motor Lead: 4-1/0 AWG , 1/Case

Part Number 53823M ID 80611425408UPC 00051128559529
  • Designed for use with 30000 Series copper compression lugs or other UL Listed copper lugs
  • Perfect for use with shielded and non-shielded cables
  • Rated for 5/8 kV applications
  • The lug or splice cover is made of EPDM rubber to resist punctures and abrasion damage
 More...
View all details
View Legal Disclaimer
For industrial/occupational use only. Not for consumer sale or use.
Specifications
Attribute Name
Value
Application
Cable Connection
Brand
3M™
Cable Shielding
Concentric Neutral (CN), Jacketed Concentric Neutral (JCN), Non-shielded, Ribbon Shield, UniShield®, Wire Shield
Cable Type
Concentric Neutral (CN), Jacketed Concentric Neutral (JCN)
Conductor Material
Aluminum, Copper
Conductor Sizes (Imperial)
250 kcmil, 350 kcmil, 500 kcmil
Connection Type
Pigtail (Non-Shielded), Pigtail (Shielded)
Connector Included
No, None
Inner Diameter of Boot to Size of Cables
1.16 in
Inner Diameter of Boot to Size of Cables (Metric)
29.5 mm
Insulation Outside Diameter
0.43-0.65 Inch
Insulation Outside Diameter Range
0.43-0.65 in
Insulation Outside Diameter Range (Metric)
10.9 - 16.5 mm
Manufacturing Origin
USA
Maximum Bolt Length
3/4 in
Maximum Bolt Length (Metric)
19.1 mm
Maximum Conductor Size (Imperial)
500 kcmil
Maximum Feeder Lead Size
1/0 AWG
Maximum Lug Length
2-3/4 in
Maximum Lug Length (Metric)
69.9 mm
Maximum Motor Lead Size
1/0 AWG
Maximum Operating Voltage
8 kV
Minimum Conductor Size (Imperial)
250 kcmil
Number of Conductors
1, 3
Product Type
Splice
Range Feeder Cable (AWG & kcmil)
2-0
Splice Type
Pigtail or V-stub
Typical Splice Length
33 in
Typical Splice Length (Metric)
838 mm
Units per Case
3
Voltage
5 - 8 kV
Voltage Application
Medium Voltage
Details
  • Designed for use with 30000 Series copper compression lugs or other UL Listed copper lugs
  • Perfect for use with shielded and non-shielded cables
  • Rated for 5/8 kV applications
  • The lug or splice cover is made of EPDM rubber to resist punctures and abrasion damage
  • Includes 6 tubes of silicone grease, 3 cold shrink jacket tubes, 3 cable ties, 3 ground straps and 1 instruction sheet
  • Withstands a temperature range of 194 to 266 degrees F (90 to 130 degrees C)

3M™ Motor Lead Pigtail Splicing Kits 5380 Series are designed for splicing motor lead cables to incoming feeder cables. These kits are removable and reusable. These kits can accommodate pigtail (stub) connections, 5/8 kV shielded and non-shielded feeders. The splice’s main component, the slip-on splice cover, is made from EPDM rubber. Mastic is used for the moisture seal on the pigtail kits. The kits utilize a high dielectric constant (K) stress control termination for the feeder cable’s electrical stress control. These kits are designed to be used with copper compression lugs. After being crimped onto the cables, the lugs are bolted together, then insulated and sealed with the 3M Motor Lead Splicing Kits. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlock™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used. Kit contents include: • (3) Lug covers • (3) Cold Shrink terminations • (12) Mastic sealing strips • (3) Copper tape strips • (3) Cleaning kits • (6) Tubes of silicone grease • (3) Cold Shrink jacket tubes • (3) Constant force springs • (3) Cable ties • (3) Ground straps • (1) Instruction sheet

Legal Disclaimer

Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.