1. United States
  2. All 3M Products
  3. Abrasives
  4. Abrasive Sheets & Rolls
  5. Cloth Sheets & Rolls
  6. 3M™ Utility Cloth Sheet 211K, 80 J-weight, 9 in x 11 in, 50/Pac, 250 ea/Case

3M™ Utility Cloth Sheet 211K, 80 J-weight, 9 in x 11 in, 50/Pac, 250 ea/Case

  • Part Number 02410
  • 3M Product Number 211K
  • 3M ID 7000118253
  • UPC 00051144024100

Fast-cutting aluminum oxide abrasive sheets come in ten standard grades to suit a variety of tasks

Flexible cloth backing works well on contours and can be twisted or folded

Cloth backing is both flexible and durable enough for machine use

View more details
Frequently viewed resources
Safety Data Sheet (PDF, 0B)
Overall Width (Metric) 228.6 mm
Product Form Sheet
Overall Width (Imperial) 9 in
Grit 80
Overall Length (Metric) 279.4 mm
Overall Length (Imperial) 11 in

Details

Highlights
  • Fast-cutting aluminum oxide abrasive sheets come in ten standard grades to suit a variety of tasks
  • Flexible cloth backing works well on contours and can be twisted or folded
  • Cloth backing is both flexible and durable enough for machine use
  • Sheets can be torn by hand for convenient sizing and reduced waste
  • Suitable for use on both ferrous and non-ferrous metals

3M™ Utility Cloth Sheet 211K provides a light-weight cloth sandpaper used for hand sanding. This closed coat product uses aluminum oxide mineral in its construction. These rolls come in a range of grades for common applications such as repairing (metal finishes, rust or other contaminant removal), deburring, blending and surface preparation for paints and coatings.

Multipurpose Abrasive May Be Used for a Variety of Metalworking Applications
Our 3M™ Utility Cloth Sheet 211K works well for multiple metalworking applications on both ferrous and non-ferrous metals: deburring operations by hand or by machine; cleaning metals prior to welding; removing rust, and other contaminants; blending and repairing metal finishes; fine sanding and polishing applications; and surface preparation for paints and coatings.

Cloth Backing Enhances Flexibility
Utility cloth sheets are a good choice for general sanding and maintenance of metal or wood surfaces. The cloth backing provides the flexibility needed to sand circular edges or small pieces, without tearing as easily as paper or losing grit from folding or bending. On the other hand, the cloth can be torn by hand when a smaller piece is needed.

Aluminum Oxide Cuts Fast and Sharp
Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.

Learn more about 3M™ Abrasive Sheets (PDF, 124 Kb)

Typical properties

Resources

Reviews

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.