1. United States
  2. All 3M Products
  3. Lubricants
  4. Wire & Cable Lubricants
  5. 3M™ Wire Pulling Lubricant Gel WL-QT, One Quart, excellent lubricant for pulling a wide variety of cables types

3M™ Wire Pulling Lubricant Gel WL-QT, One Quart, excellent lubricant for pulling a wide variety of cables types

Part Number WL-QT3M ID 7000058273UPC 00054007506225
  • Low coefficient of friction lessens the chance of cable jacket damage
  • Low residue for easier cable replacement
  • Compatible with a wide range of cable types and jacket materials
  • Temperature range of 20 to 110 degrees F (-6.7 to 43 degrees C)
 More...
View all details
View Legal Disclaimer
For industrial/occupational use only. Not for consumer sale or use.
Specifications
Attribute Name
Value
Application
Lubricant
Brand
3M™
Case Quantity
12
Color Family
White
Lubricant Type
Gel
Manufacturing Origin
USA
Maximum Temperature (Celsius)
43 Degree Celsius
Maximum Temperature (Fahrenheit)
110 Degree Fahrenheit
Minimum Temperature (Celsius)
-6.7 Degree Celsius
Minimum Temperature (Fahrenheit)
20 Degree Fahrenheit
Operating Temperature (Celsius)
-5 to 43 Degree Celsius
Operating Temperature (Fahrenheit)
20 to 110 Degree Fahrenheit
Operating Temperature Range (Celsius)
-5 °C to 49 °C
Operating Temperature Range (Fahrenheit)
20 °F to 120 °F
Product Color
Translucent White
Product Type
Gel
Tape Type
Barricade
Temperature Range
20 - 120 Degrees F (-5 - 49 Degrees C)
Units per Case
4
Volume (Imperial)
1 qt
Volume (Metric)
0.95 L
Details
  • Low coefficient of friction lessens the chance of cable jacket damage
  • Low residue for easier cable replacement
  • Compatible with a wide range of cable types and jacket materials
  • Temperature range of 20 to 110 degrees F (-6.7 to 43 degrees C)

3M™ Wire Pulling Lubricant WL is a translucent polymer gel that acts as an excellent lubricant for pulling both electrical and communication cable. This lubricant gel wipes off the cable quickly and cleanly before terminating or splicing. The lubricant has a low coefficient of friction which lessens the chance of cable jacket damage from high pulling forces.

3M™ Wire Pulling Lubricant WL is a consistent gel that does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. Temperature range of 20 to 110 degrees F (-6.7 to 43 degrees C).

Legal Disclaimer

Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.