1. United States
  2. All 3M Products
  3. Electrical
  4. Power Cable Connectors
  5. Power Cable Terminations
  6. 3M™ Cold Shrink QT-II Silicone Rubber Termination Kit 5671, CN/JCN Shielding, 15 kV, 2 AWG-250 kcmil, 1/kit

3M™ Cold Shrink QT-II Silicone Rubber Termination Kit 5671, CN/JCN Shielding, 15 kV, 2 AWG-250 kcmil, 1/kit

  • Part Number 5671
  • 3M ID 7000057819
  • UPC 00054007337980

One-piece cold shrink termination.

High dielectric-constant material regulates the distribution of electric field stress

Suitable for indoor applications

View more details
Frequently viewed resources
Tech Data Sheet (PDF, 230KB)Safety Data Sheet (PDF, 0B)
Voltage 15 kV
Conductor Sizes (Imperial) 2 AWG, 1 AWG, 1/0 AWG, 2/0 AWG, 3/0 AWG, 4/0 AWG, 250 kcmil
Insulation Outer Diameter (Metric) 20.828 mm, 21.082 mm, 21.336 mm, 21.59 mm, 21.844 mm, 22.098 mm, 22.352 mm, 22.606 mm, 22.86 mm, 23.114 mm, 19.812 mm, 20.066 mm, 20.32 mm, 20.574 mm, 16.256 mm, 16.51 mm, 16.764 mm, 26.924 mm, 27.178 mm, 27.432 mm, 27.686 mm, 17.018 mm, 17.272 mm, 17.526 mm, 17.78 mm, 18.034 mm, 18.288 mm, 18.542 mm, 18.796 mm, 19.05 mm, 19.304 mm, 19.558 mm, 23.368 mm, 23.622 mm, 23.876 mm, 24.638 mm, 24.13 mm, 24.892 mm, 25.146 mm, 24.384 mm, 25.4 mm, 25.654 mm, 26.162 mm, 26.416 mm, 25.908 mm, 26.67 mm, 27.94 mm, 28.194 mm, 28.448 mm
Number of Conductors 1
Breakout Boot No
Insulation Outer Diameter (Imperial) 0.64 in, 0.65 in, 0.66 in, 0.67 in, 0.68 in, 0.69 in, 0.71 in, 0.72 in, 0.73 in, 0.7 in, 0.81 in, 0.82 in, 0.83 in, 0.74 in, 0.75 in, 0.76 in, 0.77 in, 0.78 in, 0.79 in, 0.84 in, 0.85 in, 0.86 in, 0.87 in, 0.88 in, 0.89 in, 0.8 in, 0.91 in, 0.92 in, 0.93 in, 0.94 in, 0.95 in, 0.96 in, 0.97 in, 0.98 in, 0.99 in, 0.9 in, 1.01 in, 1.02 in, 1.03 in, 1.04 in, 1.05 in, 1.06 in, 1.07 in, 1.08 in, 1.09 in, 1.11 in, 1.12 in, 1.1 in, 1 in

Details

Highlights
  • One-piece cold shrink termination
  • High dielectric-constant material regulates the distribution of electric field stress
  • Suitable for indoor applications
  • Non-tracking, silicone rubber insulation offers durability
  • Withstands voltages up to 15kV and is 110 kV BIL-rated
  • Includes a non-skirted, 1-piece termination
  • Meets IEEE Standard 48 Class 3 for indoor, weather-protected applications

3M™ Cold Shrink QT II 5670 Series Termination Kit includes a non skirted, 1 piece termination. It ensures a pliable, tight seal for jacketed concentric neutral and concentric neutral power cables. The conjunction of high dielectric constant material and silicone rubber insulation allows the termination to withstand voltages up to 15kV.

Typical properties

Resources

Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.