1. United States
  2. All 3M Products
  3. Coatings
  4. Electrical Resins
  5. 3M™ Scotchcast™ Flame-Retardant Compound 2131C, 612 grams oz, 10 /Case

3M™ Scotchcast™ Flame-Retardant Compound 2131C, 612 grams oz, 10 /Case

  • Part Number 2131C
  • 3M ID 7000031844
  • UPC 00051128591673

Typical hardness (ASTM D2240) - 82 Shore A

Has 17-minute gel time at 73 °F (23 °C)

Useful for replacing or repairing the jacket on both single- and multi-core power cables

View more details
Frequently viewed resources
Tech Data Sheet (PDF, 34KB)Safety Data Sheet (PDF, 0B)
Voltage 1 kV
Container Size (Imperial) 21.5 oz
Cure Method Room
Flexibility Flexible
Form Liquid
Material Polyurethane

Details

Highlights
  • Typical hardness (ASTM D2240) - 82 Shore A
  • Has 17-minute gel time at 73 °F (23 °C)
  • Useful for replacing or repairing the jacket on both single- and multi-core power cables
  • Withstands a temperature range of 32 to 194 °F (0 to 90 °C)
  • Elongates 339% longer than its original size for easy insulation or wrapping
  • Flame-retardant
  • Rated up to 1 kV
  • RoHS 2011/65/EU Compliant

3M™ Scotchcast™ Electrical Resin 2131 is a 2 part, flame retardant compound, useful for coating cable jackets when splicing or repairing mine and portable cables. This permanent, polyurethane, liquid type resin has a unique formulation used in rugged conditions. The high dielectric strength offers a very good electrical insulating property to the resin.

3M™ Scotchcast™ Flame Retardant Resin 2131 has low gel point rating to ensure curing at room temperature. The high tensile strength of the resin exhibits a semi flexible property and good adhesion property after curing. It is ideal for applications that need excellent thermal shock and mechanical shock resistance. It has a high flash point, preventing any fire hazard due to quick ignition. The flame retardant resin allows you to insulate cable splices operating up to 1 kV and to seal the crotch or sheath when terminating multi core cables. RoHS 2011/65/EU Compliant.

Typical properties

Resources

Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.