1. United States
  2. All 3M Products
  3. Electrical
  4. Power Cable Connectors
  5. Power Cable Terminations
  6. 3M™ Cold Shrink QT-III 3/C Termination Kit 7691-S-4-3W, Tape/Wire/UniShield®, 5-15 kV, Insulation OD 0.50-0.70 in, 3/kit

3M™ Cold Shrink QT-III 3/C Termination Kit 7691-S-4-3W, Tape/Wire/UniShield®, 5-15 kV, Insulation OD 0.50-0.70 in, 3/kit

Part Number 7691-S-4-3W3M ID 80611450406UPC 00054007047513
  • Provides a void-free seal to tape shield, wire shield and UniShield® power cables
  • High dielectric-constant material regulates the distribution of electric field stress
  • Suitable for outdoor applications
  • Integrated design allows for easier installation in limited spaces, while sealing compounds provide constant radial pressure
 More...
View all details
For industrial/occupational use only. Not for consumer sale or use.
Specifications
Attribute Name
Value
Brand
3M™
Breakout Boot
Yes
Cable Insulation Outside Diameter Range
0.50-0.70 in
Cable Insulation Outside Diameter Range (Metric)
12.7-17.8 mm
Cable Shielding
Tape Shield, UniShield®, Wire Shield
Case Quantity
1
Conductor Sizes (Imperial)
1 AWG, 1/0 AWG, 2 AWG, 2/0 AWG, 3/0 AWG
Family
QT-III
Indoor/Outdoor
Outdoor Skirted
Insulation Level
100%, 133%
Insulation Outer Diameter (Imperial)
0.5 in, 0.51 in, 0.52 in, 0.53 in, 0.54 in, 0.55 in, 0.56 in, 0.57 in, 0.58 in, 0.59 in, 0.6 in, 0.61 in, 0.62 in, 0.63 in, 0.64 in, 0.65 in, 0.66 in, 0.67 in, 0.68 in, 0.69 in, 0.7 in
Insulation Outer Diameter (Metric)
12.7 mm, 12.954 mm, 13.208 mm, 13.462 mm, 13.716 mm, 13.97 mm, 14.224 mm, 14.478 mm, 14.732 mm, 14.986 mm, 15.24 mm, 15.494 mm, 15.748 mm, 16.002 mm, 16.256 mm, 16.51 mm, 16.764 mm, 17.018 mm, 17.272 mm, 17.526 mm, 17.78 mm
Insulation Rejacketing
Yes
Lug/Stem Connector Included in Kit
No
Manufacturing Origin
USA
Maximum Installed Length
12.25 in
Number of Conductors
3
Number of Skirts
4
Voltage
15 kV, 5 kV, 8 kV
Details
  • Provides a void-free seal to tape shield, wire shield and UniShield® power cables
  • High dielectric-constant material regulates the distribution of electric field stress
  • Suitable for outdoor applications
  • Integrated design allows for easier installation in limited spaces, while sealing compounds provide constant radial pressure

3M™ Cold Shrink QT III 7600 S 3W Series Termination Kit includes a skirted, 3 phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield® power cables. The conjunction of high dielectric constant material and sealing compounds allows the termination to withstand voltages of 5 to 35kV.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.