1. United States
  2. All 3M Products
  3. Tapes
  4. Electrical Tapes
  5. Rubber Electrical Tapes
  6. Scotch® Electrical Semi-Conducting Tape 13, 3/4 in x 15 ft, Printed, Black, 50 rolls/Case, BULK

Scotch® Electrical Semi-Conducting Tape 13, 3/4 in x 15 ft, Printed, Black, 50 rolls/Case, BULK

  • Part Number 13-3/4X15FT-K
  • 3M ID 7000007284
  • UPC 00054007150176
Overall Width (Metric) 19 mm
Total Tape Thickness without Liner (Metric) 0.76 mm
Overall Width (Imperial) 0.75 in
Total Tape Thickness without Liner (Imperial) 30 mil
Adhesive Type Non-adhesive

Rubber resin offers optimized adherence

Compatible with high-voltage splicing and terminating materials

Withstands temperatures up to 194 °F (90 °C)

View more details
Frequently viewed resources
PDF (1) Copy 26Tech Data Sheet (PDF, 287KB)
Roll of 3M Semi-Conducting Electrical Tape 13
Dependable semi-conductive tape for medium and high voltage splices and terminations

Scotch® Semi-Conducting Tape 13 is an EPR-based, semi-conductive layer to help maintain shielding across solid dielectric insulated power cables. It conforms easily to irregular shapes and helps minimize electrical stresses, even when stretched.

Features at a Glance

  • 1. Semi-conducting (low resistivity)
  • 2. Conductivity increases with elongation
  • 3. Elongates easily to conform to irregular shapes
  • 4. Compatible with most solid dielectric cable insulations and conductors
  • 5. Excellent resistance to cracking from solvents, UV, or moisture
  • 6. Compatible with high voltage splicing and terminating materials
  • Roll and box packaging for 3M Semi-Conducting Electrical Tape 13
  • Applications
    • To electrically round out high-voltage connectors and to bond to insulating materials to minimize electrical stresses
    • Continue semi-conducting strand shielding found in solid dielectric (Polyethylene, XLP, EPR, etc.) cables at 5 kV and above
    • Provide shielding for cable joints on solid dielectric insulated power cables (shielded or concentric neutral)
    • Replace semi-conducting layer beneath metallic shield of similar cables in case of damage (screening)
    • Make conductive portion of stress cone of power cable termination on solid dielectric insulated power cables
    • Maintain positive connection between concentric neutral semi-conducting jackets of power cables and semi-conducting surfaces of plug-in units
    • Establish a more positive contact between concentric neutral wires and pre-molded devices already installed with too much jacket exposed
    • Round out bolted connections on insulated bus bars

Details

Highlights
  • Rubber resin offers optimized adherence
  • Compatible with high-voltage splicing and terminating materials
  • Withstands temperatures up to 194 °F (90 °C)
  • Rated for 600V applications
  • RoHS Compliant

Scotch® Electrical Semi Conducting Tape 13 is a 30 mil, highly conformable, electrical semi conducting tape. This tape retains its conductivity with stretch. It offers excellent performance with the most solid dielectric cable insulations and conductors. The tape is suitable for indoor or outdoor applications.

Electrical Tape Environmental Resistance Guide

Harsh Condition Vinyl Tape Rubber Tape Mastic Tape
Chemical icon Chemical and Harsh Fluid Resistant
Abrasion icon Abrasion and Puncture Resistant
Moisture icon Moisture and Water Resistant
Contaminant icon Airborne Contaminant Resistant
Temperature icon High Temperatures
Vibration icon Extreme Vibration Resistant
Voltage icon High Voltage

Typical properties

Resources

Contact a Sales Rep

Similar products

Overall Width (Metric) 19 mm
Total Tape Thickness without Liner (Metric) 0.76 mm
Overall Width (Imperial) 0.75 in
Total Tape Thickness without Liner (Imperial) 30 mil
Adhesive Type Non-adhesive
For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.