3M™ Cold Shrink QT-III Termination Kit 7622-T-110, Tape/Wire/UniShield® Shielding, 5-15 kV, 3/kit, Indoor
- Part Number 7622-T-110
- 3M Product Number 7622-T-110
- 3M ID 7000006101
- UPC 00054007417606
Details
Highlights
- RELIABLE PERFORMANCE: Provides a void-free seal to the tape shield, wire shield, and UniShield® power cables
- SPECIFICALLY FORMULATED: Made with high dielectric-constant material that helps control the electrical field stress distribution
- ENGINEERED TO LAST: Built tough with non-tracking, molded, silicone rubber insulation
- INTENDED USE: Ideal for indoor and outdoor weather-protected applications
- EASY INSTALLATION: Conforms in restricted environments where space is limited
- SPECIFICATIONS: Meets or exceeds IEEE Standard 48, Class 1 requirements for 5, 8, 15, 25/28, and 35 kV terminations
- KIT CONTENTS: Items vary between kits — for detailed kit contents please refer to the product catalog
3M™ Cold Shrink QT-III Termination Kit 7620-T & 7690-T Series help provide a high-performance and void-free seal for the tape shield, wire shield, and UniShield® power cables. The kits are estimated to meet or exceed the lifetime of the cable and feature a high dielectric constant material that helps control the electric field stress distribution. For indoor and outdoor weather-protected applications, they help minimize installation time as no torches or other heating sources are needed. Additionally, they are simple to install even in confined work areas and meet or exceed IEEE Standard 48, Class 1 requirements for 5, 8, 15, 25/28, and 35 kV terminations. The insulator is made with dark gray silicone rubber, helping enable advanced tracking resistance, hydrophobic properties, and UV resistance. 3M™ Cold Shrink QT-III Termination Kit 7620-T & 7690-T Series are engineered to meet varying voltage requirements ranging from 5 to 35 kV. For comprehensive technical information about a specific product in this series, please consult a 3M expert.
Relying on science-based performance, 3M™ Cold Shrink QT-III Termination Kit 7620-T & 7690-T Series provide electrical solutions to help you meet your needs and promote efficient operations. 3M is committed to providing dependable electrical products that address everyday challenges in the field. Pioneered by 3M and implemented globally, cold shrink technology simplifies production without sacrificing performance because operations take less time and can be performed without a heating source. Known for high UV stability, pollution and chemical resistance, 3M™ Cold Shrink QT-III Termination Kit 7620-T & 7690-T Series deliver long-lasting performance and simple installation, helping you keep your operations on schedule.
Typical properties
Resources
Similar products
| Voltage | 5 kV, 8 kV | |||
| Conductor Sizes (Imperial) | 1 AWG, 2 AWG, 1/0 AWG, 2/0 AWG, 3/0 AWG, 4/0 AWG, 250 kcmil, 300 kcmil, 350 kcmil, 400 kcmil | |||
| Insulation Outer Diameter (Metric) | 16.256 mm, 16.51 mm, 16.764 mm, 17.018 mm, 17.272 mm, 17.526 mm, 17.78 mm, 18.034 mm, 18.288 mm, 18.542 mm, 18.796 mm, 19.05 mm, 19.304 mm, 19.558 mm, 19.812 mm, 20.066 mm, 20.32 mm, 20.574 mm, 20.828 mm, 21.082 mm, 21.336 mm, 21.59 mm, 21.844 mm, 22.098 mm, 22.352 mm, 22.606 mm, 22.86 mm, 23.114 mm, 23.368 mm, 23.622 mm, 23.876 mm, 24.13 mm, 24.384 mm, 24.638 mm, 24.892 mm, 25.146 mm, 25.4 mm, 25.654 mm, 25.908 mm, 26.162 mm, 26.416 mm, 26.67 mm, 26.924 mm, 27.178 mm, 27.432 mm | |||
| Breakout Boot | No | |||
| Insulation Outer Diameter (Imperial) | 0.64 in, 0.65 in, 0.66 in, 0.67 in, 0.68 in, 0.69 in, 0.7 in, 0.71 in, 0.72 in, 0.73 in, 0.74 in, 0.75 in, 0.76 in, 0.77 in, 0.78 in, 0.79 in, 0.8 in, 0.81 in, 0.82 in, 0.83 in, 0.84 in, 0.85 in, 0.86 in, 0.87 in, 0.88 in, 0.89 in, 0.9 in, 0.91 in, 0.92 in, 0.93 in, 0.94 in, 0.95 in, 0.96 in, 0.97 in, 0.98 in, 0.99 in, 1 in, 1.01 in, 1.02 in, 1.03 in, 1.04 in, 1.05 in, 1.06 in, 1.07 in, 1.08 in | |||
| Cable Shielding | Tape Shield, UniShield®, Wire Shield |
3M™ Cold Shrink QT-III Termination Kit 7622-T-110, Tape/Wire/UniShield® Shielding, 5-15 kV, 3/kit, Indoor
3M™ Cold Shrink QT-III Termination Kit 7620-T & 7690-T Series for 5-35 kV
3M™ Cold Shrink QT-III Termination Kit 7640-T & 7650-T Series for 5-35 kV
3M™ Cold Shrink QT-III Termination Kit 7600-T-3-RJS Series for 5-35 kVLegal disclaimer
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
