3M™ QS-II Molded Rubber Splice 5501, 15 kV, 2/0 AWG (Al) stranded, 2-1/0 AWG solid, Cable Insul. O.D. 0.637-.0.900 in, 1/case
- Part Number 5501
- 3M ID 7000005929
- UPC 00054007122937
Details
Highlights
- Inline splice to use on tape shield, wire shield, or UniShield® cables
- Designed for direct burial installations, as well as indoor and outdoor applications
- Peroxide-cured EPDM rubber construction provides physical protection
- Rated for 15 kV cables
- Factory-tested to offer reliability
- Meets the requirements of IEEE 404 standards
3M™ 5500 Series Molded Rubber QS II Splice Kit is an inline splice designed to use on 15kV tape shield, wire shield, or UniShield® cables with copper or aluminum conductors. Its peroxide cured EPDM rubber construction ensures a long life. The continuous current rating of each splice is the same as the current rating of the cable that it is sized to accommodate.
3M™ 5500 Series Molded Rubber QS II Splice Kit includes 2 Cold Shrink™ end seals, 2 silicone grease tubes, 2 shielding tape 24 strips, a shield clamp, mastic sealing strip, shield continuity assembly, semi con tape 13 roll, vinyl tape 35 roll, solvent saturated cleaning pad, plastic glove and an instruction sheet. The kit meets the requirements of IEEE 404 standards.
Typical properties
Resources
Legal disclaimer
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
