1. United States
  2. All 3M Products
  3. Electrical
  4. Splices & Accessories
  5. Motor Lead Splices
  6. 3M™ Motor Lead Pigtail Splice 5304, 1 kV, 1-Hole Lug Connection, Feeder: 250-500 kcmil , Motor Lead: 4/0 AWG-500 kcmil , 1/Case

3M™ Motor Lead Pigtail Splice 5304, 1 kV, 1-Hole Lug Connection, Feeder: 250-500 kcmil , Motor Lead: 4/0 AWG-500 kcmil , 1/Case

  • Part Number 5304
  • 3M ID 7000005808
  • UPC 00054007122661

Splices motor lead cables to incoming feeder cables

Designed to use with copper compression, 1-hole lugs

Slip-on lug cover is made of durable EPDM rubber

View more details
Frequently viewed resources
Tech Data Sheet (PDF, 79KB)Safety Data Sheet (PDF, 0B)
Maximum Operating Voltage 1 kV
Splice Type Pigtail Only
Maximum Motor Lead Size 500 kcmil
Maximum Feeder Lead Size 500 kcmil

Details

Highlights
  • Splices motor lead cables to incoming feeder cables
  • Designed to use with copper compression, 1-hole lugs
  • Slip-on lug cover is made of durable EPDM rubber
  • For pigtail (stub) connections at 1000V or less
  • Includes 3 each of pigtail lug covers, mastic sealing strips, and tubes of silicone grease, plus an instruction sheet
  • CSA Certified and RoHS 2011/65/EU Compliant‎

3M™ Motor Lead Pigtail Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less. The splice’s main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit makes three splices and contains the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used. Kit contents include: • (3) Pigtail lug covers • (3) Mastic sealing strips • (3) Locking pins (kits 5302–5304 only) • (3) Tubes of silicone grease • (1) Instruction sheet

Typical properties

Resources

Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.