3M™ Hot Melt Adhesive 3764TC, Clear, 5/8 in x 2 in, 11 lb, Case
- Part Number 3764 TC
- 3M Product Number 3764 Q
- 3M ID 7000000886
- UPC 00021200825996
Need local support?
3M has qualified and trained distributor partners, who are now 3M Preferred Adhesive Distributors, to serve you with all of your bonding and assembly needs.
Solve engineering, materials, and process challenges with Ask 3M, an AI technical assistant verified on 3M knowledge. Ask, don't search.
Details
Highlights
- PLASTIC BONDING: Bonds a variety of plastic, such as polycarbonate, polyethylene, and polypropylene substrates
- LOW TEMPERATURE FLEXIBILITY: Maintains flexible properties at low temperatures to prevent bond failure
- CLEAR FORMULATION: Transparent adhesive provides invisible bond lines for aesthetic applications
- FAST SETTING: Quick adhesive set time helps enable rapid production cycles and assembly processes
- LSE COMPATIBILITY: Designed to bond challenging low surface energy plastic surfaces effectively
- MULTIPLE FORMATS: Available in various stick sizes for different hot melt applicator systems
- PRODUCT ASSEMBLY: Designed for small joint assembly, large surface lamination, and mounting applications
- VERSATILE BONDING: Works across diverse plastic substrates
3M™ Hot Melt Adhesive 3764 is a clear, versatile thermoplastic adhesive specifically designed for bonding a wide variety of plastics, including challenging low surface energy substrates like polyethylene and polypropylene. This fast-setting adhesive maintains flexibility at low temperatures while providing reliable adhesion strength, making it ideal for product assembly applications on difficult plastic surfaces.
- Assembly
- Attaching
- Securing
- Repairing
- Potting
- Panel bonding
- Wire tacking
- Bundling
- Sealing
- Encapsulating
- Rigidizing
- Gluing
- Packaging
Dispense with 3M™ Hot Melt Applicator AE II 3M™ Hot Melt Applicator PG II, or the 3M™ Hot Melt Applicator TC
3M™ Hot melts are 100% solids thermoplastic resins. These adhesives are engineered to re-melt after bonding if exposed to high enough temperature. The advantages of hot melt adhesives is that, unlike mechanical fasteners and sealing tapes, they are virtually invisible between surfaces.
Our hot melt adhesives liquefy when heated, quickly fill gaps and wet the bonding surface. When they are applied to a surface, they cool, harden and reach their bond strength within seconds. Due to their quick work-life, you can move assemblies immediately upon application which eliminates the need for clamps, fixturing or additional drying time and energy.
Designed to Meet Your Demands
Engineered to meet a variety of needs across a wide range of industries, 3M™ Hot Melt Adhesive 3764 offers a flexible, yet durable bond. Our compatible hot melt adhesives demonstrate our dedication to provide you with a tough and dependable solution, ready to meet your project demands.
Typical properties
Resources
Support
Ask a 3M Expert
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
