Ask a 3M Expert
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
3M™ Adhesive Mix Monitor Hardware Kit, 1 Processing Unit, 1 Amplifier, 1 Power Cord (120V Type B) , 1 Kit/Case
- 3M ID 7100403171
- UPC 00068060766427
Need local support?
3M has qualified and trained distributor partners, who are now 3M Preferred Adhesive Distributors, to serve you with all of your bonding and assembly needs.
Details
Highlights
- SYSTEM COMPONENT: The processing unit, power cords and amplifier reader are components of the 3M™ Adhesive Mix Monitor system kit
- A REAL-TIME QUALITY CHECK: Monitors improper mix ratio, temperature, and adhesive cure to ensure confidence in the accuracy and reliability of the adhesive composition
- REDUCE REWORK: Catches two-part adhesive mix quality issues before dispensing starts, with real-time data
- REMOVES GUESSWORK: Efficiently purge only what is necessary, precisely when needed, with real-time feedback on your adhesive
- SAVES TIME: Reduces the need for less efficient quality checks associated with time-consuming traditional methods
- TRACEABILITY: Use time-stamped data to connect the mix quality of a two-part adhesive with the specific product on which it was applied
- COST-EFFECTIVE: Helps maintain the continued operational efficiency of equipment, preventing the need for replacement due to blockages and overuse
- EASILY INTEGRATES: Can be integrated into your current process and retroactively installed on most dispensing systems
- ENABLE INNOVATION: Discover efficient workflows by streaming data into your dispenser’s PLC, enabling advanced capabilities with smart dispensing
3M™ Adhesive Mix Monitor System is an advanced solution that provides manufacturers with real-time data on the mix quality of two-part adhesives at the point of dispense, helping to manage the quality and product dispensing ratio that can otherwise result in bond failure and faulty adhesive performance. Whether you are establishing a new workflow or aiming to improve the efficiency of your current process, this system can deliver reliable data to help you avoid common pitfalls in the industry. Discover how the 3M™ Adhesive Mix Monitor system can transform your mixing and dispensing processes by utilizing real-time data as your guide.
The 3M™ Adhesive Mix Monitor is part of a family of products that offer lab-tested and innovative solutions addressing the key challenges faced by customers using two-part adhesives. This system’s capabilities are thanks to proprietary 3M technology that uses disposable sensors and a small processing unit to analyze a range of factors, including improper mix ratio, temperature, and adhesive cure — transmitting the collected data to your programmable logic controller (PLC) or PC. Where traditional quality control checks can fall short of diagnosing a potential bond failure, with this innovative system in place, customers can reimagine their adhesive dispensing process. It can help customers optimize their dispensing process using the continuous data from the system, while also helping to maintain the continued operational efficiency of equipment by preventing the need for replacement due to blockages and overuse. For added simplicity, the 3M™ Adhesive Mix Monitor is compatible with many 3M two-part structural adhesives and uses time-stamped data to connect the mix quality of a two-part adhesive with the specific product on which it was applied.
Typical properties
Resources
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
