3M™ Exhalation Valve Filter 604, 30 ea/Case

  • Part Number 604
  • 3M Product Number 604
  • 3M ID 7100245392
  • UPC 50638060431950

NIOSH approved accessory for 3M™ Reusable Respirator Half Facepiece 6000 Series with 3M™ Particulate Filters 7093, 5N11/501/603 or 2091

Designed to help filter the wearer’s exhaled breath

Provides source control when worn with 3M 6000 Series Half Facepiece Reusable Respirators

View more details

Details

Highlights
  • NIOSH approved accessory for 3M™ Reusable Respirator Half Facepiece 6000 Series with 3M™ Particulate Filters 7093, 5N11/501/603 or 2091
  • Designed to help filter the wearer’s exhaled breath
  • Provides source control when worn with 3M 6000 Series Half Facepiece Reusable Respirators
  • EVF filter media meets 99% Bacterial Filtration Efficiency (BFE) based on testing conducted per ASTM F2101. Not FDA cleared as a medical device
  • EVF is fluid resistant based on testing conducted per ASTM F1862. Not FDA cleared as a medical device
  • Can be safely wiped with water, cleaners, and disinfectants between uses
  • Designed to maintain the breathing comfort provided by an exhalation valve
  • Allows users to conduct a positive pressure seal check while installed on facepiece

The 3M™ Exhalation Valve Filter 604 is designed to mount on the valve cover of the 3M™ Reusable Respirator Half Facepiece 6000 Series. The Exhalation Valve Filter is designed to help filter the exhaled breath of the respirator wearer and provides source control when worn with the 3M 6000 Series Half Facepiece Reusable Respirator. NIOSH approved accessory only for use with 3M 6000 Series Half Facepiece respirators when used with 3M Particulate Filters 7093, 2091 or 5N11/501/603. Not FDA cleared for use as a medical device for use in surgical applications.

The 3M™ Exhalation Valve Filter 604 is designed to help filter the exhaled breath of the respirator wearer and provides source control when worn with the 3M™ Reusable Respirator Half Facepiece 6000 Series. It can be easily installed and removed from 3M 6000 Series Half Facepiece Reusable Respirators, and users can conduct a positive pressure seal check while installed. The hard case can be wiped with disinfecting wipes used for 3M 6000 Series Half Facepiece Reusable Respirators. Users should replace the Exhalation Valve Filter if damaged, if the filter media becomes soiled, or if breathing becomes difficult. NIOSH approved accessory only for use with 3M™ 6000 Series half facepiece respirators with 3M particulate filters 7093, 2091 or 5N11/501/603. Not FDA cleared for use as a medical device for use in surgical applications.

Typical properties

Resources

Reviews

Large Volume Order

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. If this product is being purchased for use in firefighting duties, please review this Notice Regarding Fluorinated Organic Compounds.