3M™ DBI-SALA® Confined Space Connecting Device Mounting Bracket is constructed of steel and finished with zinc plating. This bracket enables the attachment of our approved secondary 3M™ DBI-SALA® or 3M™ Protecta® anchorage connectors. This bracket is affixed to the davit mast using two detent pins that are equipped with retracting pin lanyards that help prevent breaks and snags.
Enable the attachment of an approved secondary 3M™ DBI-SALA® or 3M™ Protecta® anchorage connector to 3M™ DBI-SALA® Davits with 3M™ DBI-SALA® Confined Space Connecting Device Mounting Bracket. 3M's mounting bracket is constructed primarily of steel and finished with a zinc plated coating for corrosion protection. It can be affixed to the vertical davit mast using two detent pins. Detent pins are attached using retracting pin lanyards that help prevent breaks and snags.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. If this product is being purchased for use in firefighting duties, please review this Notice Regarding Fluorinated Organic Compounds.